David Moore Contact Information

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: Harold_V, WJH, cbrew

Post Reply
User avatar
Marty_Knox
Posts: 1329
Joined: Thu Jan 09, 2003 6:50 pm
Location: Michigan, USA

David Moore Contact Information

Post by Marty_Knox » Tue Jul 03, 2018 12:23 pm

Does anyone have an email address or phone number for David Moore?
The Hudson I'm working on has one of his Worthington hot water pumps.

User avatar
dwilloughby
Posts: 225
Joined: Fri Apr 18, 2008 8:39 pm
Location: North Las Vegas, NV

Re: David Moore Contact Information

Post by dwilloughby » Tue Jul 03, 2018 1:18 pm

PM sent with phone and e-mail address

User avatar
Marty_Knox
Posts: 1329
Joined: Thu Jan 09, 2003 6:50 pm
Location: Michigan, USA

Re: David Moore Contact Information

Post by Marty_Knox » Tue Jul 03, 2018 6:29 pm

dwilloughby wrote:
Tue Jul 03, 2018 1:18 pm
PM sent with phone and e-mail address
Never got it, Dean.

User avatar
Andypullen
Posts: 2000
Joined: Thu May 22, 2003 8:17 am
Location: Bel Air, MD

Re: David Moore Contact Information

Post by Andypullen » Tue Jul 03, 2018 7:15 pm

Pam built a bunch of those pumps if you can't get a hold of Dave.
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30"

Mountaineer
Posts: 130
Joined: Sun Dec 02, 2007 4:45 pm
Location: Canada

Re: David Moore Contact Information

Post by Mountaineer » Tue Jul 03, 2018 7:18 pm

I miss Pam.

Mountaineer.

User avatar
dwilloughby
Posts: 225
Joined: Fri Apr 18, 2008 8:39 pm
Location: North Las Vegas, NV

Re: David Moore Contact Information

Post by dwilloughby » Tue Jul 03, 2018 7:46 pm

Sent again...

Cary Stewart
Posts: 493
Joined: Wed Jun 08, 2011 5:54 pm

Re: David Moore Contact Information

Post by Cary Stewart » Tue Jul 03, 2018 9:05 pm

Speaking of Pam. What has happened to her? I know that she got really busy at Sherline a couple of years ago.
Cary

765nkp
Posts: 625
Joined: Sun May 06, 2007 9:24 pm
Location: st louis, mo

Re: David Moore Contact Information

Post by 765nkp » Tue Jul 03, 2018 10:57 pm

Just go to his website. www.dmprototypes.com

User avatar
Marty_Knox
Posts: 1329
Joined: Thu Jan 09, 2003 6:50 pm
Location: Michigan, USA

Re: David Moore Contact Information

Post by Marty_Knox » Wed Jul 04, 2018 3:25 pm

Thank You, Everyone! I was able to take the pump apart and put back together - it now works!

User avatar
Andypullen
Posts: 2000
Joined: Thu May 22, 2003 8:17 am
Location: Bel Air, MD

Re: David Moore Contact Information

Post by Andypullen » Sat Jul 07, 2018 7:10 pm

Pam is just fine. I spoke with her a week or so ago. Well, messaged with her.
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30"

Post Reply