MORE PARTS FROM THE OLD SCHOOL MACHINE SHOP

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: cbrew, Harold_V

Post Reply
User avatar
Trainman4602
Posts: 3482
Joined: Sat Oct 16, 2004 9:26 pm
Location: New Jersey

MORE PARTS FROM THE OLD SCHOOL MACHINE SHOP

Post by Trainman4602 »

Here is the latest from the old school shop (I kind of like that phrase).

These are the boiler flanges that I was making on the video. Second operation the “O” ring groove completed and the bolt holes drilled.

I am using a special stud with a knurled end and large head on them. They are 4-40 thread. I reduced them from 5-40 tapped holes. The sample that I made is working well.

These studs press in to a .111 hole and lock in place enough to hold it while tightening up the six nuts.

BTW that is two hours work no special tooling or fixture no programming on the computer just the drill press.
Attachments
20180917_144850.jpg
20180917_145721.jpg
20180917_150018.jpg
20180917_150127.jpg
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
Post Reply