Harold has surpassed 17,000 Posts
- Atkinson_Railroad
- Posts: 226
- Joined: Mon Jun 08, 2015 6:27 pm
- Location: Michigan
- Contact:
Harold has surpassed 17,000 Posts
I just happened notice Harold is now into the 17,000's.
And to think that among all those posts, his clarity, wisdom and just plain "fairness"
has been the backbone of this board for a very high percentage.
If it's worth congratulating, I'll toss out a reminder for him, "Thank You!"
John
And to think that among all those posts, his clarity, wisdom and just plain "fairness"
has been the backbone of this board for a very high percentage.
If it's worth congratulating, I'll toss out a reminder for him, "Thank You!"
John
-
- Posts: 559
- Joined: Fri May 18, 2012 11:46 pm
- Location: Curtis, WA
Re: Harold has surpassed 17,000 Posts
Absolutely!Atkinson_Railroad wrote: ↑Sat Sep 22, 2018 6:26 am I just happened notice Harold is now into the 17,000's.
And to think that among all those posts, his clarity, wisdom and just plain "fairness"
has been the backbone of this board for a very high percentage.
If it's worth congratulating, I'll toss out a reminder for him, "Thank You!"
John
I find myself being drawn to anything Harold posts because I can know that it will be from a knowledgeable source and well explained. I do not think I have 17,000 total thoughts about anything....
Gregg
Just let go of it, it will eventually unplug itself.
Just let go of it, it will eventually unplug itself.
- tornitore45
- Posts: 2078
- Joined: Tue Apr 18, 2006 12:24 am
- Location: USA Texas, Austin
- SteveHGraham
- Posts: 7788
- Joined: Sat Jan 17, 2009 7:55 pm
- Location: Florida
Re: Harold has surpassed 17,000 Posts
Harold is the board's airbag. When the rest of us are guessing, he often steps in and gives us the facts.
Every hard-fried egg began life sunny-side up.
- Greg_Lewis
- Posts: 3021
- Joined: Wed Jan 15, 2003 2:44 pm
- Location: Fresno, CA
Re: Harold has surpassed 17,000 Posts
Ditto. I appreciate that he and the other mods keep this a clean, on-topic board with no flame wars.
Greg Lewis, Prop.
Eyeball Engineering — Home of the dull toolbit.
Our motto: "That looks about right."
Celebrating 35 years of turning perfectly good metal into bits of useless scrap.
Eyeball Engineering — Home of the dull toolbit.
Our motto: "That looks about right."
Celebrating 35 years of turning perfectly good metal into bits of useless scrap.
Re: Harold has surpassed 17,000 Posts
Thanks, guys, but don't lose sight of the fact that one of the reasons this board runs so smoothly is due to the readers. We have gathered an array of individuals who are here for the right reasons, so there's not really much for a moderator to do. For that, I thank all of you, and I'm sure I speak for everyone involved in the operation of this fine venue. It has been home to me for more than 16 years now.
H
H
Wise people talk because they have something to say. Fools talk because they have to say something.
- Greg_Lewis
- Posts: 3021
- Joined: Wed Jan 15, 2003 2:44 pm
- Location: Fresno, CA
Re: Harold has surpassed 17,000 Posts
Group hug!
Greg Lewis, Prop.
Eyeball Engineering — Home of the dull toolbit.
Our motto: "That looks about right."
Celebrating 35 years of turning perfectly good metal into bits of useless scrap.
Eyeball Engineering — Home of the dull toolbit.
Our motto: "That looks about right."
Celebrating 35 years of turning perfectly good metal into bits of useless scrap.
- Steamchris
- Posts: 487
- Joined: Fri Jan 27, 2012 3:48 pm
- Location: Duisburg/Germany
- Contact:
Re: Harold has surpassed 17,000 Posts
Hey Chef,
a big hug and a respectful and big THANK YOU for the work on the board ,from Germany. I found some friends here and that counts and says alot about YOUR work Harold!!
All the very best
Chris
a big hug and a respectful and big THANK YOU for the work on the board ,from Germany. I found some friends here and that counts and says alot about YOUR work Harold!!
All the very best
Chris
The light at the end of the tunnel could be a train
Health and Safety Notice
due to the current economic circumstances , the light at the end of the tunnel
has been switched off !
Health and Safety Notice
due to the current economic circumstances , the light at the end of the tunnel
has been switched off !
Re: Harold has surpassed 17,000 Posts
Thanks, Chris. I appreciate the kind thoughts, but I'm all the happier that we are able to serve our friends in Germany. A very welcome addition to the "family".
Harold
Harold
Wise people talk because they have something to say. Fools talk because they have to say something.
Re: Harold has surpassed 17,000 Posts
I've been in the live steam hobby a lot of years, but am fairly new to chaski....who is Harold ?
- neanderman
- Posts: 896
- Joined: Mon Jan 09, 2012 7:15 pm
- Location: Cincinnati, Ohio, USA
Re: Harold has surpassed 17,000 Posts
Harold is the King!
In anther group I participate in, he would be called the 'List Mom' -- he maintains order and keeps us all in line. Get out of line, and he's likely to (gently...) slap your hand.
He's also a tremendous repository of information on machining -- read his posts and you're pretty much guaranteed to learn something.
Ed
LeBlond Dual Drive, 15x30
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels
Proud denizen of the former "Machine Tool Capitol of the World"
LeBlond Dual Drive, 15x30
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels
Proud denizen of the former "Machine Tool Capitol of the World"