Finger Lakes Live Steamers 50th Anniversary Meet
- Benjamin Maggi
- Posts: 1409
- Joined: Wed Apr 25, 2007 10:38 pm
- Location: Albany, NY
Re: Finger Lakes Live Steamers 50th Anniversary Meet
I tried to find the membership info on the FLLS website but the tab didn't work. I clicked it but no information popped up on the screen. I then clicked on the "Contact" tab to find out and that didn't work either. The other tabs seemed to work.
"One cannot learn to swim without getting his feet wet." - Benjamin Maggi
- Building: 7.25" gauge "Sweet Pea" named "Catherine"
- Building: 7.25" gauge "Sweet Pea" named "Catherine"
Re: Finger Lakes Live Steamers 50th Anniversary Meet
Yes, the current FLLS website leaves a bit to be desired. The 50th anniversary is well shown, but, it's not possible to become a member right now. Hopefully the right people will notice and it will get fixed.
David
David
-
- Posts: 46
- Joined: Sat Oct 13, 2018 4:55 am
Re: Finger Lakes Live Steamers 50th Anniversary Meet
I'll post when it is finished...the webmaster said he was going to try to finish updates this weekend. sorry for the issues but Tim and I can answer questions.
-
- Posts: 26
- Joined: Mon May 08, 2017 1:09 pm
Re: Finger Lakes Live Steamers 50th Anniversary Meet
Unfortunately the webmaster changed this year. The new website was supposed to have been finished by August first, but has been delayed. We are hopeful all the place holders will be active soon. As Tom stated, we can answer any questions you have in the meantime.
-
- Posts: 1061
- Joined: Tue Jan 16, 2007 9:39 pm
- Location: Cambridge Ontario
Re: Finger Lakes Live Steamers 50th Anniversary Meet
Does the turntable area still have the rails in for the 3/4" if someone wanted to bring an engine to show?
-
- Posts: 604
- Joined: Sun Feb 22, 2009 9:21 pm
- Location: massachusetts,usa
Re: Finger Lakes Live Steamers 50th Anniversary Meet
Too Bad the 3/4" line is a thing of the past. Would have loved to have run there. Too many projects and not enough time.
steamer
Re: Finger Lakes Live Steamers 50th Anniversary Meet
Yes! The turntable and several of the steaming bays have both 4-3/4" and 3-1/2" gauge track. Other than the turn table and steaming bays, there is no other 3-1/2" track. If you bring a 3/4" loco for show and tell, that would work fine.Steve Bratina wrote: ↑Sat Oct 20, 2018 8:19 am Does the turntable area still have the rails in for the 3/4" if someone wanted to bring an engine to show?
David
Re: Finger Lakes Live Steamers 50th Anniversary Meet
Membership information has now been posted at the Finger Lakes Live Steamers website:
https://fingerlakeslivesteamers.org/membership-info/
There is no contact email address posted yet, just a "contact" page which will automatically open your default email app. The email address for questions about membership or anything else is: info@fingerlakeslivesteamers.org
Also, several videos have been posted including "tours" around each of the 7-1/4", 4-3/4" and Gauge 1 tracks.
Hope this helps a little bit and may encourage others to joint us at the 50th anniversary event.
David
https://fingerlakeslivesteamers.org/membership-info/
There is no contact email address posted yet, just a "contact" page which will automatically open your default email app. The email address for questions about membership or anything else is: info@fingerlakeslivesteamers.org
Also, several videos have been posted including "tours" around each of the 7-1/4", 4-3/4" and Gauge 1 tracks.
Hope this helps a little bit and may encourage others to joint us at the 50th anniversary event.
David
- Benjamin Maggi
- Posts: 1409
- Joined: Wed Apr 25, 2007 10:38 pm
- Location: Albany, NY
Re: Finger Lakes Live Steamers 50th Anniversary Meet
It is indeed working. Thanks!
"One cannot learn to swim without getting his feet wet." - Benjamin Maggi
- Building: 7.25" gauge "Sweet Pea" named "Catherine"
- Building: 7.25" gauge "Sweet Pea" named "Catherine"