Small blowdown valve?
- Dick_Morris
- Posts: 2851
- Joined: Sat Jan 04, 2003 2:09 pm
- Location: Anchorage, AK
Re: Small blowdown valve?
Thanks. The little ridges on the hand wheel are a nice touch as is the square drive.
- Greg_Lewis
- Posts: 3020
- Joined: Wed Jan 15, 2003 2:44 pm
- Location: Fresno, CA
Re: Small blowdown valve?
Looking at Jack's and David's, it seems that blowdown's don't have to be quick-opening. Yes?
Greg Lewis, Prop.
Eyeball Engineering — Home of the dull toolbit.
Our motto: "That looks about right."
Celebrating 35 years of turning perfectly good metal into bits of useless scrap.
Eyeball Engineering — Home of the dull toolbit.
Our motto: "That looks about right."
Celebrating 35 years of turning perfectly good metal into bits of useless scrap.
Re: Small blowdown valve?
Correct!Greg_Lewis wrote: ↑Wed Nov 07, 2018 10:32 pm Looking at Jack's and David's, it seems that blowdown's don't have to be quick-opening. Yes?
David
Re: Small blowdown valve?
Here is the one I made that is real simple. To the right is how to make a T handle to operate it.
Fred V
Pensacola, Fl.
Pensacola, Fl.