EE Product Updates - 5/3/19
- AnthonyDuarte
- Posts: 491
- Joined: Tue Jan 19, 2010 10:46 am
- Location: Orange, CA
- Contact:
Re: EE Product Updates - 5/3/19
I've been known to change my mind at the drop of a hat, but at the moment I think 1/4" is as large as I'll go. It fills a nice gap between what's currently available and the 3/8" penberthy. I understand the prices have gone up and the quality has gone down, but they are still available and old stock comes up fairly regularly.
Re: EE Product Updates - 5/3/19
Hello Anthony, Since I'm sure you don't have enough on your plate already, Have you any plans or news about the Nathan 4000?
Thanks, Vic
Thanks, Vic
For Duty and Humanity
Re: EE Product Updates - 5/3/19
The safeties look great, like the rest of Anthony's stuff. Can't wait.
Remember I need a safety for the 1208, so there are only 171 available for everyone else.
Remember I need a safety for the 1208, so there are only 171 available for everyone else.
Matt Mason
- AnthonyDuarte
- Posts: 491
- Joined: Tue Jan 19, 2010 10:46 am
- Location: Orange, CA
- Contact:
Re: EE Product Updates - 5/3/19
Matt,
I’m only getting 171 back, so there’s only 170 left for everyone else.
Sent off new monitor waxes. If they look good I’m thinking those will be next after the large injectors and safeties. This is the project that got me interested in injectors in the first place, and I’m itching to deliver them. The inner workings have been redesigned countless times in an effort to make the Monitor as bullet proof and easy to operate/maintain as possible.
I’m only getting 171 back, so there’s only 170 left for everyone else.
Sent off new monitor waxes. If they look good I’m thinking those will be next after the large injectors and safeties. This is the project that got me interested in injectors in the first place, and I’m itching to deliver them. The inner workings have been redesigned countless times in an effort to make the Monitor as bullet proof and easy to operate/maintain as possible.
- AnthonyDuarte
- Posts: 491
- Joined: Tue Jan 19, 2010 10:46 am
- Location: Orange, CA
- Contact:
Re: EE Product Updates - 5/3/19
1” safety valve castings arrived!