Large injectors in production

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: Harold_V, WJH, cbrew

Post Reply
AnthonyDuarte
Posts: 265
Joined: Tue Jan 19, 2010 10:46 am
Location: Mountain View, CA
Contact:

Large injectors in production

Post by AnthonyDuarte » Fri Jun 07, 2019 8:08 pm

Hi everyone,

Just a heads up that I've been working on the large injectors and they should be ready in about a month.

It occurred to me today that the 6.5 pint nozzles for the 2.5" scale Monitors will fit nicely (with some modification) in the Large injector body.
So, to open this injector up to a wider range of boilers, I will offer it in either 6.5 or 8 pint per minute variations, as well as with 1/4" NPT threaded connections or 3/8" tubing connections (not dependent on nozzle size).

There's nothing more fun than making more work for myself than is necessary!

Anthony
https://www.eccentricengineer.com/large-injector

User avatar
Fender
Posts: 2661
Joined: Wed May 02, 2007 8:33 pm
Location: Chattanooga TN

Re: Large injectors in production

Post by Fender » Sat Jun 08, 2019 4:45 am

Look out, Penberthy!
Dan Watson

Jim Schulz
Posts: 53
Joined: Fri Mar 25, 2011 8:22 pm

Re: Large injectors in production

Post by Jim Schulz » Sat Jun 08, 2019 7:03 am

Keep up the good work!

Post Reply