Covid Creations

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: cbrew, Harold_V

User avatar
rwmorris
Posts: 828
Joined: Wed Jan 14, 2004 9:03 am
Location: Healdsburg, CA. USA
Contact:

Re: Covid Creations

Post by rwmorris »

I soaked the ties in this magic wood preservative and started fastening them in place with stainless screws. Fun fun! Hopefully I can start laying rail by next week.

-RM
Attachments
AF365621-67CF-49A0-AE11-23BA5BE12196.jpeg
7D42F935-04A8-44D2-88BF-52BC7AEA679C.jpeg
Steve Bratina
Posts: 1061
Joined: Tue Jan 16, 2007 9:39 pm
Location: Cambridge Ontario

Re: Covid Creations

Post by Steve Bratina »

Picture still comes out wrong. Will try when I get the new computer.
User avatar
Steggy
Posts: 1984
Joined: Tue Jun 28, 2011 9:19 pm
Location: JB Pritzker’s Hellhole
Contact:

Re: Covid Creations

Post by Steggy »

Steve Bratina wrote: Sat May 02, 2020 10:56 am Picture still comes out wrong. Will try when I get the new computer.
It's not your computer that is doing it.
———————————————————————————————————————————————————————
Music isn’t at all difficult.  All you gotta do is play the right notes at the right time!  :D
User avatar
Bill Shields
Posts: 10556
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Covid Creations

Post by Bill Shields »

you need to rotate the picture 90 degrees before you give it to the bbs software.
Too many things going on to bother listing them.
Steve Bratina
Posts: 1061
Joined: Tue Jan 16, 2007 9:39 pm
Location: Cambridge Ontario

Re: Covid Creations

Post by Steve Bratina »

I will see what I can do with the I phone. The computer is hanging on the wall with a nail through it.
User avatar
cbrew
Posts: 3163
Joined: Sat Jan 04, 2003 12:17 pm
Location: Vancouver Wa

Re: Covid Creations

Post by cbrew »

this has been discussed before, the issue is with the bbs software not processing the metadata in the picture correctly. what devise captured the image?
If it is not live steam. its not worth it.
User avatar
rwmorris
Posts: 828
Joined: Wed Jan 14, 2004 9:03 am
Location: Healdsburg, CA. USA
Contact:

Re: Covid Creations

Post by rwmorris »

The engine service area has fresh decking and a water supply established. The rail has been delivered and I have about 1/3 the total amount of ties ready to go.

-RM
Attachments
5BC50E1A-A441-4004-8BBC-7020CAAEF865.jpeg
Last edited by rwmorris on Sun May 03, 2020 5:57 am, edited 1 time in total.
User avatar
rwmorris
Posts: 828
Joined: Wed Jan 14, 2004 9:03 am
Location: Healdsburg, CA. USA
Contact:

Re: Covid Creations

Post by rwmorris »

Ties are all set thru the curve. Time to lay the track.
Attachments
77BA2721-B287-4523-8541-6B9B6643F23D.jpeg
Glenn Brooks
Posts: 2930
Joined: Mon Nov 10, 2014 1:39 pm
Location: Woodinville, Washington

Re: Covid Creations

Post by Glenn Brooks »

Very cool!
Moderator - Grand Scale Forum

Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge

Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....
User avatar
rwmorris
Posts: 828
Joined: Wed Jan 14, 2004 9:03 am
Location: Healdsburg, CA. USA
Contact:

Re: Covid Creations

Post by rwmorris »

Rails are going down!
Attachments
6E7E12E7-C77A-4FC6-8F52-2C7746B857CE.jpeg
User avatar
rwmorris
Posts: 828
Joined: Wed Jan 14, 2004 9:03 am
Location: Healdsburg, CA. USA
Contact:

Re: Covid Creations

Post by rwmorris »

Angus gets a little sunshine....
Attachments
F7678BF6-AAE8-4439-A673-8AB750DAC18A.jpeg
User avatar
Bill Shields
Posts: 10556
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Covid Creations

Post by Bill Shields »

needs a mask....
Too many things going on to bother listing them.
Post Reply