PMLW 3/4” Scale Trucks
PMLW 3/4” Scale Trucks
A question....I recently inherited several items from the estate of a long time Live Steam modeler. One of these was a set of Bettendorf trucks in 3/4” scale, with the letters PMLW formed into the side frame castings. Can anyone shed light on this maker? I really have no use for the trucks, and may offer them for sale.
Re: PMLW 3/4” Scale Trucks
Can you post a pic?
Re: PMLW 3/4” Scale Trucks
Solar1953, you might try sending a PM to "Comstock-Friend" on this forum. He had the same question as you a couple years ago and might have figured out the origins of his castings.
Re: PMLW 3/4” Scale Trucks
I have been asked to post photos of these trucks, so here ya go. I can’t explain why the builder chose to use a single spring, or why he never installed journal box covers. But this is the condition they were in when I inherited them.
v- SZuiderveen
- Posts: 530
- Joined: Sun Jan 05, 2003 12:03 am
- Location: Baltimore
Re: PMLW 3/4” Scale Trucks
This is why single spring: PRR cabin car trucks!
Steve
Steve
Re: PMLW 3/4” Scale Trucks
Ah, I see! Very good! I guess the builder of these trucks may have had that prototype in mind.