Power Model Supply Duplex Steam Pump Drawings
-
- Posts: 86
- Joined: Sun Aug 14, 2011 11:20 pm
Power Model Supply Duplex Steam Pump Drawings
A friend of mine is looking for a copy of the original drawings for the Power Model Supply Duplex steam pump. The drawings he currently has are not original and it looks like they were made by dismantling one of the pumps and creating a drawing from that. He would really like a copy of the original drawings if anyone would be able to make a copy.
Re: Power Model Supply Duplex Steam Pump Drawings
Are you referring to the duplex pump sold (long ago) by Cole's Power Model Supply?
That's the name I know of associated with it.
RussN
That's the name I know of associated with it.
RussN
-
- Posts: 567
- Joined: Wed Jan 07, 2004 8:04 am
- Location: Princeton, NJ
Re: Power Model Supply Duplex Steam Pump Drawings
check your PM's
- Bill Shields
- Posts: 10557
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: Power Model Supply Duplex Steam Pump Drawings
Bvb style diplex?
Too many things going on to bother listing them.
-
- Posts: 604
- Joined: Sun Feb 22, 2009 9:21 pm
- Location: massachusetts,usa
Re: Power Model Supply Duplex Steam Pump Drawings
Power model supply sold the Van Brocklin Duplex pump drawings and materials to make said pump. The drawings they sold have the C.A. Street & Son. stamped on the drawings which were purchased from Bill Van Brocklin. These drawings are more like sketches than engineering drawings. The pump can be made from these drawings, as I built over 40 to those specs. P.M for copies of drawings.
steamer
- Bill Shields
- Posts: 10557
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: Power Model Supply Duplex Steam Pump Drawings
But....did they all run?....just kidding...your 3/4" pumps are works de art.
Too many things going on to bother listing them.
-
- Posts: 604
- Joined: Sun Feb 22, 2009 9:21 pm
- Location: massachusetts,usa
Re: Power Model Supply Duplex Steam Pump Drawings
never had any returned, so I think that is a pretty good batting average.
steamer
- Bill Shields
- Posts: 10557
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: Power Model Supply Duplex Steam Pump Drawings
i am not surprised. had i been in the 3/4" / 1" building stage...would have purchased yours....
Too many things going on to bother listing them.
Re: Power Model Supply Duplex Steam Pump Drawings
If you are talking about the 1.5 inch scale Bill vanbrocklin pumps sold by power models I own the patterns and drawings for those pumps and sell them regularly I am currently out of stock on the castings as I just went through a series of them rather quickly contact me if you need a set of drawings
-
- Posts: 245
- Joined: Mon Aug 15, 2005 11:13 am
- Location: Beverly-by-the-Boston & Maine, MA
- Contact:
Re: Power Model Supply Duplex Steam Pump Drawings
1" scale VanBrocklin (Power Model Supply) duplex patterns and original drawings are at FRIENDS MODELS. Drawings and castings, materials, available.
FRIENDS also has the 1" scale duplex VB pump with the outside levers, that was formerly sold by Allen Models.
www.friendsmodels.com
FRIENDS also has the 1" scale duplex VB pump with the outside levers, that was formerly sold by Allen Models.
www.friendsmodels.com