Cabin Fever

Marty_Knox · Post by **Marty_Knox** » Sun Dec 16, 2007 7:25 pm

Well, the plan is to leave WITHOUT most of the stuff I bring...

SO, there should be plenty of room for Jim's boiler and a compressor.

10 Wheeler Rob · Post by **10 Wheeler Rob** » Sun Dec 16, 2007 8:16 pm

Hi all,

I have decided it is in my best interest to stay home this year, work on the 10 wheeler, and put the money I would spend at the sale tables and auction towards the boiler that's being fabracated for the engine.

Would love to be there, it is a great event and I hope to make it next year.

The rest of you, do have agood time and enjoy.

Rob

Mike Walsh · Post by **Mike Walsh** » Tue Jan 08, 2008 12:39 pm

So.. About 11 days left!

Anyone else going?

Mike Walsh

Fender · Post by **Fender** » Tue Jan 08, 2008 2:48 pm

I will be there too, middle part of the day on Saturday.

Errol Groff · Post by **Errol Groff** » Tue Jan 08, 2008 5:46 pm

I will be there with the rest of the New England Model Engineering Society mob.

Bill Shields · Post by **Bill Shields** » Tue Jan 08, 2008 6:53 pm

Marty:

REMEMBER...

The best laid plans of mice and men, oft go astray...

Bring a big truck.....never know what you may want to bring back.

Mike Walsh · Post by **Mike Walsh** » Tue Jan 08, 2008 8:29 pm

So far, I'll be there.. Still trying to figure out logistics

Provided I'm there, I'll be with the G scale live steamers, and probably walking around learning, photographing, and purchasing....

Might bring the frame for my 0-4-0, and get some tips, learnings, etc from others...

Look for a kid thats probably wearing a orange t-shirt that says "TRAIN CREW" on the back of it (I'm the vice president of the RIT Model Railroad Club), or maybe even a red t-shirt with the Wabash Frisco and Pacific logo on the front of it....

Mike

SZuiderveen · Post by **SZuiderveen** » Tue Jan 08, 2008 9:00 pm

I am definietly going to Cabin Fever now. Will hang out at Marty Knox's table, will have lots of Live Steam, Modeltec, Model Engineer; and some Australian Model Engineer, Engineering in Miniature and ICS softbounds and bluebooks. Also some model engineering books.

Steve Zuiderveen

Mike Walsh · Post by **Mike Walsh** » Mon Jan 14, 2008 8:08 am

ok, i've confirmed it. I'll be there saturday only.... Original plans fell through for the weekend, so I'll be attending Sat only....

10 hours of driving... ouch.

Mike

Dave_Johnson · Post by **Dave_Johnson** » Mon Jan 14, 2008 8:23 pm

You better check you map, I think you will find that it is more than 10 hours from St. Louis to York PA.

Dave J.

Mike Walsh · Post by **Mike Walsh** » Mon Jan 14, 2008 11:37 pm

Dave_Johnson wrote:You better check you map, I think you will find that it is more than 10 hours from St. Louis to York PA.

Dave J.

I am actually coming from Rochester, NY where I go to school most of the calendar year

Dave_Johnson · Post by **Dave_Johnson** » Tue Jan 15, 2008 7:15 pm

Ohh! Now I understand. Hope to see you there.

DJ

The Home Machinist!

Cabin Fever

Will not be makeing it this year

Cabin Fever

Plans...