New Year.....New project

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: cbrew, Harold_V

User avatar
BAdams
Posts: 249
Joined: Wed Feb 23, 2011 7:15 pm
Location: Moreno Valley, CA

Re: New Year.....New project

Post by BAdams »

"jobstacles" - That is brilliant!!


Brook
User avatar
gwrdriver
Posts: 3443
Joined: Mon Jan 06, 2003 10:31 am
Location: Nashville Tennessee

Re: New Year.....New project

Post by gwrdriver »

I sometimes refer to it as a Domino effect, . . one job has to be toppled, in order to start the next job, which in turn will cause another to topple, etc. I'm in the middle of a row of Dominoes right now and life keeps adding Dominoes to the far end.
GWRdriver
Nashville TN
User avatar
Comstock-Friend
Posts: 160
Joined: Fri Apr 23, 2010 9:05 am
Location: Sun Valley, California

Re: New Year.....New project

Post by Comstock-Friend »

JBodenmann wrote: Tue Aug 07, 2018 8:06 pm"I made the slots slightly oversize to allow one box to raise up a bit without binding, only about .010" as one journal box isn't going to move much more than it's mate."
Thanks Jack; we'll go with the .010" clearance. I can't see a situation where one box is all the way up and the other all the way down. LALS track just isn't that bad!

John
Post Reply