Pennsy E6s #460

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: cbrew, Harold_V

Post Reply
jessebanning
Posts: 666
Joined: Mon Jan 12, 2009 11:45 pm
Location: Port Angeles, WA
Contact:

Pennsy E6s #460

Post by jessebanning »

I am looking for frame and tender drawings for the E^s #460 once offered from Saturated steam. I have all the drawings needed except the frame and tender. Can anybody help?
User avatar
steveleatherman
Posts: 135
Joined: Fri Feb 17, 2006 3:01 pm
Location: Trumbauersville, PA
Contact:

Post by steveleatherman »

I have the first two years of Modeltec where the locomotive was featured. PM me and I can probably make you some copies.
Owner/Operator of BoilerSaver - "Ask the User" - www.boilersaver.com

Success is the ability to go from one failure to the next without any loss of enthusiasm :D
User avatar
LivingLegend
Posts: 2149
Joined: Sun Jun 11, 2006 3:55 pm
Location: The Boonies of Alabama

Post by LivingLegend »

Jesse & Steve:

For info....

Modeltec ended the E6 construction series with the engine.... The tender portion of the series never appeared in the magazine.

LL
Do it right.... Or don't do it at all
I have no life. Therefore, I have a hobby
It's not that I'm apathetic, I just flat don't care
An Intellectual is nothing more than an Over-Educated IDIOT
Blogs: Where people with nothing to say..... Say it
Post Reply