O-Ring Data

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: Harold_V, WJH, cbrew

Post Reply
david griner
Posts: 136
Joined: Thu Jul 10, 2008 6:39 pm
Location: peoria,az
Contact:

O-Ring Data

Post by david griner » Tue Aug 12, 2014 11:24 pm

As a point of information, please note this address:

https://www.parker.com/literature/ORD%2 ... ndbook.pdf

We use o-rings in many applications and this handbook provides a great deal of design data that should help remove many of the questions regarding material types and groove dimensions. They even have a computer program to help with the design problems.
Found it while trying to solve some of my own questions!

Have no affiliation with the Company.

Take care,
Dave Griner

User avatar
Sandiapaul
Posts: 424
Joined: Wed Jan 07, 2004 8:04 am
Location: Princeton, NJ

Re: O-Ring Data

Post by Sandiapaul » Sat Aug 16, 2014 7:02 am

I have been using their handbook for years, it is an excellent resource. Good to have it online too!

User avatar
Highiron
Posts: 681
Joined: Thu Jan 09, 2003 7:04 pm
Location: Lancaster, PA

Re: O-Ring Data

Post by Highiron » Mon Aug 18, 2014 2:19 pm

Dave

can you check the address for this..I keep getting an error page

would love to see it

Mike

hudson
Posts: 217
Joined: Mon Nov 28, 2005 1:53 pm

Re: O-Ring Data

Post by hudson » Mon Aug 18, 2014 2:38 pm

Mike,

If you can use the metric version of the handbook, it's available at:

http://www.praedifa.de/literature/pdf/G ... 705-GB.pdf

Best regards,
hudson

User avatar
warmstrong1955
Posts: 3498
Joined: Thu Mar 18, 2010 2:05 pm
Location: Northern Nevada

Re: O-Ring Data

Post by warmstrong1955 » Mon Aug 18, 2014 2:47 pm

I have also used the handbook for years. I have a printed copy from the 80's, and the pdf.

I tried the link....works for me.
Try going here: http://parker.com/portal/site/PARKER/me ... nextfmt=EN

See if that gets ya there. FYI, it's 9MB.

Bill
Today's solutions are tomorrow's problems.

User avatar
Highiron
Posts: 681
Joined: Thu Jan 09, 2003 7:04 pm
Location: Lancaster, PA

Re: O-Ring Data

Post by Highiron » Mon Aug 18, 2014 3:52 pm

Hudson & Bill

Thanks...I will give it a try

Mike

david griner
Posts: 136
Joined: Thu Jul 10, 2008 6:39 pm
Location: peoria,az
Contact:

Re: O-Ring Data

Post by david griner » Mon Aug 18, 2014 6:07 pm

Hello Mike,
Not sure what to do to make it work--------not a computer guy, you know!
Looks like the fellows got it worked out though.
Take care,
Dave

Post Reply