Page 1 of 1

O-Ring Data

Posted: Tue Aug 12, 2014 11:24 pm
by david griner
As a point of information, please note this address:

https://www.parker.com/literature/ORD%2 ... ndbook.pdf

We use o-rings in many applications and this handbook provides a great deal of design data that should help remove many of the questions regarding material types and groove dimensions. They even have a computer program to help with the design problems.
Found it while trying to solve some of my own questions!

Have no affiliation with the Company.

Take care,
Dave Griner

Re: O-Ring Data

Posted: Sat Aug 16, 2014 7:02 am
by Sandiapaul
I have been using their handbook for years, it is an excellent resource. Good to have it online too!

Re: O-Ring Data

Posted: Mon Aug 18, 2014 2:19 pm
by Highiron
Dave

can you check the address for this..I keep getting an error page

would love to see it

Mike

Re: O-Ring Data

Posted: Mon Aug 18, 2014 2:38 pm
by hudson
Mike,

If you can use the metric version of the handbook, it's available at:

http://www.praedifa.de/literature/pdf/G ... 705-GB.pdf

Best regards,
hudson

Re: O-Ring Data

Posted: Mon Aug 18, 2014 2:47 pm
by warmstrong1955
I have also used the handbook for years. I have a printed copy from the 80's, and the pdf.

I tried the link....works for me.
Try going here: http://parker.com/portal/site/PARKER/me ... nextfmt=EN

See if that gets ya there. FYI, it's 9MB.

Bill

Re: O-Ring Data

Posted: Mon Aug 18, 2014 3:52 pm
by Highiron
Hudson & Bill

Thanks...I will give it a try

Mike

Re: O-Ring Data

Posted: Mon Aug 18, 2014 6:07 pm
by david griner
Hello Mike,
Not sure what to do to make it work--------not a computer guy, you know!
Looks like the fellows got it worked out though.
Take care,
Dave