Tormach owners

This forum is dedicated to those Hobbyists Interested in CNC machining in their home shops. (Digital Read Outs are also topical, as is CAD/CAM as it relates to CNC)

Moderator: Harold_V

User avatar
Comstock-Friend
Posts: 104
Joined: Fri Apr 23, 2010 9:05 am
Location: Sun Valley, California

Re: Tormach owners

Post by Comstock-Friend » Fri Apr 13, 2018 3:38 pm

Well, the Tormach finally got home and set up late last month. Decided to put it in the middle of the garage. Everything behind it is on wheels to roll about. Glad I went through the exercise as even with two Bridgeports, an Index 55 vertical mill, two 13" South Bends and an Enco 12" lathe, there is now more room to move about in the shop with the Tormach than without!
100_0714 small.jpg
100_0715 small.jpg
100_0716 small.jpg
Anyway, working through projects that you can get by with the conversational programming. Using the thread mill routine, I milled a 84 hole collet rack of MDF that fits in a drawer of my Enco lathe bench. The MDF fixture is on the table. Thanks for the info guys.

John

chief
Posts: 196
Joined: Sat Jan 04, 2003 5:51 pm

Re: Tormach owners

Post by chief » Sun Apr 15, 2018 12:24 pm

The mill looks great, you should have a lot of fun with it.

Terry

Post Reply