The Home Machinist!

hello all....

I have I believe ir is a micro-tech air chuck...3" diameter...with adapter plate for a sherline lathe....with rotary air draw bar. i have no use for it. if anyone might be interested let me know I can get some photos of it. works beautifully. only thing needed would be a selonoid valve to control it. I used that for something else a while back.
the adapter plate is for a 3/4"-16 thread.

asking 800.00


Pamela

You might want to post this in the "for sale" section, unless it's specific to home shop CNC.

Steve

$800.00 for a 3 inch chuck?

_________________
You can buy good parts, or you can buy cheap parts, but you can't buy good cheap parts.

correction....

this is a micro-centric pneumatic chuck with draw bar....model 3-50-3


new with draw bar is 2300.00

asking 800.00


Pamela

I think you would do better selling it on CNCZone. This site is more for the hobby machinist. We could almost buy a new machine for what you're asking for that chuck.

Don't get me wrong, it's probably a fine piece of equipment, just not the type of equipment that would be used by anyone here.

If I offended you, I sincerely apologize.

Steve

_________________
You can buy good parts, or you can buy cheap parts, but you can't buy good cheap parts.

not at all...I am posting it in a number of places.


never know when someone ...'just has to have' that neat piece.

Pamela