Hi all,
Thanks to accept me in your forum. I did spent hours reading post and watching also video about CNC. One day I decided to jump into this world and creat my own machine. Was a big challenge. So I share my small experience if it can help others or just one members
Here it is my new machine:
https://www.youtube.com/watch?v=SiMj_YJgu8s
Laurent
My new homemade CNC
Moderator: Harold_V
-
- Posts: 25
- Joined: Tue Jun 11, 2013 9:12 am
- Location: Chateauroux- France
- Contact:
Re: My new homemade CNC
Welcome!
What a great machine!!
Thanks for posting that.
What a great machine!!
Thanks for posting that.
Glenn
Operating machines is perfectly safe......until you forget how dangerous it really is!
Operating machines is perfectly safe......until you forget how dangerous it really is!
Re: My new homemade CNC
Laurent,
Welcome to The Home Machinist!.
Excellent Design and Workmanship., VERY COOL.
How many hours did it take you to build this machine
How long have you been using Linux
Do you use Linux for all your computer needs
Before I forget..
It would be very helpful if you could put
your EARTHLY LOCATION in your profile so it shows up
below your name and to the left of all of your post’s.
Ken.
Welcome to The Home Machinist!.
Excellent Design and Workmanship., VERY COOL.
How many hours did it take you to build this machine
How long have you been using Linux
Do you use Linux for all your computer needs
Before I forget..
It would be very helpful if you could put
your EARTHLY LOCATION in your profile so it shows up
below your name and to the left of all of your post’s.
Ken.
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
The best learning experiences come
from working with the older Masters.
Ken.
-
- Posts: 25
- Joined: Tue Jun 11, 2013 9:12 am
- Location: Chateauroux- France
- Contact:
Re: My new homemade CNC
ken572,
Thanks for your comments.
I spent 1 years to finish the machine. I use both Linux and other systems (winbug !lol). But for the CNC I only use linux, no license, works great since the first start and without any concerns.
Thanks for your comments.
I spent 1 years to finish the machine. I use both Linux and other systems (winbug !lol). But for the CNC I only use linux, no license, works great since the first start and without any concerns.
-
- Site Admin
- Posts: 1730
- Joined: Wed Dec 18, 2002 8:17 pm
- Location: Mesa, AZ USA
Re: My new homemade CNC
Very Cool!
Neat use of wood and metal to build your machine!
Marty
Neat use of wood and metal to build your machine!
Marty
"Jack of all Trades, Master of None"
-
- Posts: 2281
- Joined: Sat Jan 04, 2003 8:33 pm
- Location: 40 Miles West of Chicago/near DeKalb
- Contact:
Re: My new homemade CNC
You did a nice job on that.
Some day I need to try that Linux software.
Jim
Some day I need to try that Linux software.
Jim
Tool & Die Maker/Electrician, Retired 2007
So much to learn and so little time.
www.outbackmachineshop.com
So much to learn and so little time.
www.outbackmachineshop.com