Does anyone have firsthand knowledge of products from:
http://modelshopcnc.com/index.htm
I think their XY table setups are interesting. Could prove versatile on the Bridgeport without affecting normal operations. Not to mention the flexibility of putting on other machine types, drill press, lathe. Can go on the shelf when not needed. Looks pretty good for small parts.
Curious to the quality of the compound table, they do have ballscrews. I would think the larger offered motors could do decent work.
Thanks for any input.
Bob D.
CNC XY table
Moderator: Harold_V
CNC XY table
3/4" Juliet II 0-4-0
3/4" Purinton Mogul "Pogo"
3/4" Hall Class 10 wheeler
3/4" Evans Caribou/Buffalo 2-8-0
3/4" Sweet Violet 0-4-0
3/4" Hunslet 4-6-0
3/4" Kozo A3. Delayed construction project
1 1/2" A5 Camelback 0-4-0
3/4" Purinton Mogul "Pogo"
3/4" Hall Class 10 wheeler
3/4" Evans Caribou/Buffalo 2-8-0
3/4" Sweet Violet 0-4-0
3/4" Hunslet 4-6-0
3/4" Kozo A3. Delayed construction project
1 1/2" A5 Camelback 0-4-0