Wheel turning service
Moderators: gwrdriver, Harold_V
-
- Posts: 2166
- Joined: Thu May 22, 2003 8:17 am
- Location: Bel Air, MD
Wheel turning service
Hi all,
I just recently added a 14" Reed Prentice lathe to my shop. If there's anybody out there that needs drivers or tires turned up to 14" (The lathe will swing 16 1/2"); send me a sketch or drawing and I'll quote them for you.
References available.
I can run other types of parts as well.
awpliamloc at verizon dot net
Thanks,
Andy Pullen
I just recently added a 14" Reed Prentice lathe to my shop. If there's anybody out there that needs drivers or tires turned up to 14" (The lathe will swing 16 1/2"); send me a sketch or drawing and I'll quote them for you.
References available.
I can run other types of parts as well.
awpliamloc at verizon dot net
Thanks,
Andy Pullen
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.
-
- Posts: 2166
- Joined: Thu May 22, 2003 8:17 am
- Location: Bel Air, MD
Here are some drivers ready for the bead blaster prior to painting and tread turning....Crankpin holes and keyways to be done as well.
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.
-
- Posts: 2166
- Joined: Thu May 22, 2003 8:17 am
- Location: Bel Air, MD
A photo of the back side of a wheel from the same order in the lathe.
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.
-
- Posts: 2166
- Joined: Thu May 22, 2003 8:17 am
- Location: Bel Air, MD
Here's a flyweight being machined for a Roll Models 2-6-2.
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.
-
- Posts: 2166
- Joined: Thu May 22, 2003 8:17 am
- Location: Bel Air, MD
Bump
Lathe is open...Any kind of lathe work....Smokeboxes, wheels, tires, flyweights, axles, journal boxes, etc...
Andy Pullen
Andy Pullen
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.
-
- Posts: 2166
- Joined: Thu May 22, 2003 8:17 am
- Location: Bel Air, MD
Thank you for the kind words, Jon...
I take my time and am not trying to get "rich" doing this. If I can help somebody out and make a little "mad money" or trade something in the process, I'm happy.
Making wheels is fun for me....You gotta like what you're doing....
Andy Pullen
I take my time and am not trying to get "rich" doing this. If I can help somebody out and make a little "mad money" or trade something in the process, I'm happy.
Making wheels is fun for me....You gotta like what you're doing....
Andy Pullen
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.
-
- Posts: 2166
- Joined: Thu May 22, 2003 8:17 am
- Location: Bel Air, MD
Thanks John,
I've got 16 more blanks cut for the other pair of Fs....I ought to have them for you at CF next month...
Andy
I've got 16 more blanks cut for the other pair of Fs....I ought to have them for you at CF next month...
Andy
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.
-
- Posts: 2166
- Joined: Thu May 22, 2003 8:17 am
- Location: Bel Air, MD
Bump
Here are some Allen Models Mogul drivers that I'm waiting on journal boxes for from the customer. They will get bead blasted again to clean them up before shipping.
Andy Pullen
Andy Pullen
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.
-
- Posts: 2166
- Joined: Thu May 22, 2003 8:17 am
- Location: Bel Air, MD
Re: Wheel turning service
Here is an ashpan I made for another client. Sheet metal isn't exactly my strength and I'm not a welder, but I can make stuff like this as well. I'll be posting pics of castellated nuts for crankpins in a day or so....
awpliamloc at verizon dot net is my home email. Change the "at" to @ and the "dot" to .
410-652-2850 for my cell. When I'm at my day job (6:30am eastern time to 4:00pm); the cell doesn't work in the building, so leave a message....I'll call you back.
Thank you,
Andy Pullen
awpliamloc at verizon dot net is my home email. Change the "at" to @ and the "dot" to .
410-652-2850 for my cell. When I'm at my day job (6:30am eastern time to 4:00pm); the cell doesn't work in the building, so leave a message....I'll call you back.
Thank you,
Andy Pullen
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.