Helpful SouthBend Lathe Information

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

Post Reply
AllThumbz

Helpful SouthBend Lathe Information

Post by AllThumbz »

For owners of 13" South Bend lathes, the most helpful site on the internet is owned by Ryan Battelle.
He details each and every assembly with a photo essay on each. I cannot say enough about the usefulness of Ryan's site:

Refurbishing a 1952 South Bend 13"x40" Lathe
http://home.roadrunner.com/~rcbattelle/lathe.html

I have moderated two Yahoo groups for over a year now. You need to apply to join, and I usually approve people within a day or so.
The first group has exploded parts drawings and assembly drawings for the Heavy 10 lathe and its accessories.
The second group has "How to" files which detail how to break down and restore the lathe, and power it.

South Bend 10L Owners Group on Yahoo
http://finance.groups.yahoo.com/group/s ... 10L/files/

South Bend 10L "How to" Files on Yahoo
http://finance.groups.yahoo.com/group/s ... les/files/

I hope these are of help to South Bend lathe owners.

Best,

Nelson
pockets
Posts: 807
Joined: Fri Feb 04, 2005 9:55 pm
Location: Kimball, Michigan

Re: Helpful SouthBend Lathe Information

Post by pockets »

Nelson,
Thanks. As the proud new owner of a SB-13, I am grateful for these links. I have already joined the Yahoo sites.

Again, thanks,
Greg B.
When the man at the door said, "Alcohol, Tobacco and Firearms," I naturally assumed it was a delivery.....

"From my cold, dead hand!" C. Heston
AllThumbz

Re: Helpful SouthBend Lathe Information

Post by AllThumbz »

pockets wrote:Nelson,
Thanks. As the proud new owner of a SB-13, I am grateful for these links. I have already joined the Yahoo sites.

Again, thanks,
Greg B.

Be sure to check out Ryan's site- he totally restores a SB 13"...
I ended up copying some of the pages- you can literally make a manual of all the work he did.
There are literally hundreds of pictures of his efforts.

Best,

Nelson
pockets
Posts: 807
Joined: Fri Feb 04, 2005 9:55 pm
Location: Kimball, Michigan

Re: Helpful SouthBend Lathe Information

Post by pockets »

Yes, thanks.... I've been doing a little cruising, of his site, and some shameless downloading.

Greg B.
When the man at the door said, "Alcohol, Tobacco and Firearms," I naturally assumed it was a delivery.....

"From my cold, dead hand!" C. Heston
AllThumbz

Re: Helpful SouthBend Lathe Information

Post by AllThumbz »

pockets wrote:Yes, thanks.... I've been doing a little cruising, of his site, and some shameless downloading.

Greg B.
What I did was to explode each photo to full size, and copy it along with the regular photos and text as a reference manual, because many of the assemblies and techniques of the Heavy 10 are similar to the 13 inch. The detail on his site is fantastic.

Best,

Nelson
Post Reply