The list is getting short...
Moderator: Harold_V
The list is getting short...
Getting a lot of progress on cleaning out projects in the shop, finished all the small stuff like fixing the winless winch for a friend’s boat. Now its full speed ahead on the truck with the rolling chassis done, getting the cab stripped down and off to the media blaster. Once it’s done then in can start on my mogul.
The best times were behind one of Al's engines
Re: The list is getting short...
calgator
You better watch that list, it grows from the bottom.
Nice truck, Studebaker?
Frank
You better watch that list, it grows from the bottom.
Nice truck, Studebaker?
Frank
Re: The list is getting short...
Definitely Stude, Dude. Nice shop and things goin' on. Frank knows about this stuff .
Re: The list is getting short...
Yes, it’s a Studebaker, 1951 ½ ton. My oldest son has a 62 Studebaker Champ he is working on, it runs and he wants to start driving it soon. Since my boys are 17 and 19 they are eager to earn money and not pay rent, so all the things I would normally have to complete like trimming trees or mowing yard.
Once this truck is back we will get it ready and paint it before August and then it’s off to my father. In the mean time we are working on a storage shed in the back yard that will free up more of the garage, so I can get the Hemi and other parts from my 57 out of the way.
I’ve ordered the metal to start cutting the frame for my LE 1-1/2” scale Northern. It should be interesting on how to do it. I will be posting another thread.
If you guys are interested I can post pictures of the fabrication of parts for the truck when we updated to more modern hardware like suspension?
Once this truck is back we will get it ready and paint it before August and then it’s off to my father. In the mean time we are working on a storage shed in the back yard that will free up more of the garage, so I can get the Hemi and other parts from my 57 out of the way.
I’ve ordered the metal to start cutting the frame for my LE 1-1/2” scale Northern. It should be interesting on how to do it. I will be posting another thread.
If you guys are interested I can post pictures of the fabrication of parts for the truck when we updated to more modern hardware like suspension?
The best times were behind one of Al's engines
Re: The list is getting short...
calgator
I am interested in all metal fabrication. I would enjoy your fabrication processes and pictures. How things are made have lessons for us all.
Frank
I am interested in all metal fabrication. I would enjoy your fabrication processes and pictures. How things are made have lessons for us all.
Frank
- seal killer
- Posts: 4696
- Joined: Sat Aug 18, 2007 10:58 pm
- Location: Ozark Mountains
Re: The list is getting short...
calgator--
--Bill
Gee. I am REALLY interested in anything hemi-related. Especially, '57! 392? Pictures? Please?so I can get the Hemi and other parts from my 57 out of the way
--Bill
You are what you write.
Re: The list is getting short...
Studebaker trucks were something. I remember back about 40+ years ago we had this old beast of a Stude .. It musta been a 5 ton or something. they used to crush cars the old fashion way by pummeling them with big weight off a crane, after they set them on fire. The thing is they would load all these pancakes on that big Studebaker truck and drive it very far away for reprocess. It was a very long haul at some fair speed at stretches.
When I checked under the hood I kept looking for another engine hidden somewhere. There wasn't. It was just that big 6 flat head.
When I checked under the hood I kept looking for another engine hidden somewhere. There wasn't. It was just that big 6 flat head.
Re: The list is getting short...
Hold on now. You mean American hemi.
There were others. I believe Andre Citroen would pop up in a search.
Just for the fun of it, before they did the hemispherical head stuff they mated two 4cyl together to make a huge V-8. An interesting read.
There were others. I believe Andre Citroen would pop up in a search.
Just for the fun of it, before they did the hemispherical head stuff they mated two 4cyl together to make a huge V-8. An interesting read.
Re: The list is getting short...
Yeah, Pics, lotsa pics
Re: The list is getting short...
The 57 Plymouth Belvedere original engine is 301 polyhemi (that means the cylinders are 90 degrees from each other but 45 degrees from the centerline of the crank). Right now I’m using a 383 with a matching torqueflight to move the car around until I get the body done.
The 51 Studebaker in the picture is a 6 cylinder flat head with a cam from a champ that I turned the journals down to fit. This gave me more lift and duration of opening so I should get an additional 15% out of the original 98 c.i. That I bored out to 0.120, needed to because after 310,000 miles the pistons were slapping side to side.
After I get the cab out and the shed completed this weekend I will post pictures, right now I have a hard time climbing around the welder, blasting cabinet, and many other “things” in my way. As for the truck I’ve been posting picture on my facebook but will copy some here.
The 51 Studebaker in the picture is a 6 cylinder flat head with a cam from a champ that I turned the journals down to fit. This gave me more lift and duration of opening so I should get an additional 15% out of the original 98 c.i. That I bored out to 0.120, needed to because after 310,000 miles the pistons were slapping side to side.
After I get the cab out and the shed completed this weekend I will post pictures, right now I have a hard time climbing around the welder, blasting cabinet, and many other “things” in my way. As for the truck I’ve been posting picture on my facebook but will copy some here.
- Attachments
The best times were behind one of Al's engines
Re: The list is getting short...
Ok, so here are some status pictures as requested.
- Attachments
The best times were behind one of Al's engines
Re: The list is getting short...
Looks good Cassidy, keep it up. Welding is a skill I have never made a living doing, but use almost daily. My experience came while in college from working (no pay) for a man that built Pitts Specials for aerobatic pilots. The fuselage was constructed of 4130 Chromoly. It was all gas welded. He machined spindles and other parts from raw materials. Things I learned there, I have used throughout my racing life. The truck is going nicely, keep us updated.
Engines have always been interesting to me, but I have almost no experience with Mopar. It will be interesting to see the inside of that piece.
Frank
Engines have always been interesting to me, but I have almost no experience with Mopar. It will be interesting to see the inside of that piece.
Frank