Hello My Friends
Here is the 3/4" brake cylinder casting set. It consists of 5 bronze castings. Front cylinder head, rear cylinder head, cylinder casting, clevis casting, and rear lever mount to be bolted to the rear cylinder head. They are bronze investment castings and the cylinder can be finished 5/8" to 23/32". If there is sufficient interest I can provide the cylinder machined with a stainless piston rod and return spring, brass piston with teflon cup seal, and assembled with the correct T bolts holding the cylinder heads in place. Price for casting set with drawing is $112.00
Thanks
Jack
3/4" Brake cylinder casting set.
Moderators: gwrdriver, Harold_V
- JBodenmann
- Posts: 3865
- Joined: Sun Oct 26, 2003 1:37 pm
- Location: Tehachapi, California
Re: 3/4" Brake cylinder casting set.
Nice!
One set for me, please, Jack.
Regards,
Andy
One set for me, please, Jack.
Regards,
Andy
- JBodenmann
- Posts: 3865
- Joined: Sun Oct 26, 2003 1:37 pm
- Location: Tehachapi, California
Re: 3/4" Brake cylinder casting set.
Hi Andy
It will be in the mail Monday Morning.
Jack
It will be in the mail Monday Morning.
Jack
Re: 3/4" Brake cylinder casting set.
jack,
How much would the fully machined RTR cylinder be?
How much would the fully machined RTR cylinder be?
7-1/2” gauge 5” scale 2-4-4t
7-1/2” gauge Fitchburg Northern
4-3/4” gauge 1.5” scale 0-4-4t
7-1/2” gauge Fitchburg Northern
4-3/4” gauge 1.5” scale 0-4-4t