As a point of information, please note this address:
https://www.parker.com/literature/ORD%2 ... ndbook.pdf
We use o-rings in many applications and this handbook provides a great deal of design data that should help remove many of the questions regarding material types and groove dimensions. They even have a computer program to help with the design problems.
Found it while trying to solve some of my own questions!
Have no affiliation with the Company.
Take care,
Dave Griner
O-Ring Data
-
- Posts: 137
- Joined: Thu Jul 10, 2008 6:39 pm
- Location: peoria,az
- Contact:
-
- Posts: 567
- Joined: Wed Jan 07, 2004 8:04 am
- Location: Princeton, NJ
Re: O-Ring Data
I have been using their handbook for years, it is an excellent resource. Good to have it online too!
Re: O-Ring Data
Dave
can you check the address for this..I keep getting an error page
would love to see it
Mike
can you check the address for this..I keep getting an error page
would love to see it
Mike
Re: O-Ring Data
Mike,
If you can use the metric version of the handbook, it's available at:
http://www.praedifa.de/literature/pdf/G ... 705-GB.pdf
Best regards,
hudson
If you can use the metric version of the handbook, it's available at:
http://www.praedifa.de/literature/pdf/G ... 705-GB.pdf
Best regards,
hudson
- warmstrong1955
- Posts: 3568
- Joined: Thu Mar 18, 2010 2:05 pm
- Location: Northern Nevada
Re: O-Ring Data
I have also used the handbook for years. I have a printed copy from the 80's, and the pdf.
I tried the link....works for me.
Try going here: http://parker.com/portal/site/PARKER/me ... nextfmt=EN
See if that gets ya there. FYI, it's 9MB.
Bill
I tried the link....works for me.
Try going here: http://parker.com/portal/site/PARKER/me ... nextfmt=EN
See if that gets ya there. FYI, it's 9MB.
Bill
Today's solutions are tomorrow's problems.
Re: O-Ring Data
Hudson & Bill
Thanks...I will give it a try
Mike
Thanks...I will give it a try
Mike
-
- Posts: 137
- Joined: Thu Jul 10, 2008 6:39 pm
- Location: peoria,az
- Contact:
Re: O-Ring Data
Hello Mike,
Not sure what to do to make it work--------not a computer guy, you know!
Looks like the fellows got it worked out though.
Take care,
Dave
Not sure what to do to make it work--------not a computer guy, you know!
Looks like the fellows got it worked out though.
Take care,
Dave