Need an HF Coupon

This forum is intended for users to share places/vendors/surplus centers etc., to visit of machining/metalworking interest. Please be sure to list Name of the venue, City & State, Operating hours, a review and a web link if possible. The intent is so that those planning a trip or visiting your area might be interested in visiting!

Moderators: Harold_V, GlennW

Post Reply
chucketn
Posts: 151
Joined: Sat Jun 21, 2008 8:15 am
Location: Jonesborough,TN

Need an HF Coupon

Post by chucketn » Tue Aug 11, 2015 11:02 am

Have to go to Harbor Freight today. No coupons on hand. Anyone have a link to a 20-25% printable in store coupon? I can’t seem to find one.
Chuck


chucketn
Posts: 151
Joined: Sat Jun 21, 2008 8:15 am
Location: Jonesborough,TN

Re: Need an HF Coupon

Post by chucketn » Thu Aug 13, 2015 6:37 am

Thanks, Ken.

I got a 20% coupon from Valpak.com, printed it out, and got an HF chainsaw sharpener. Got a tree down in the front yard. Setup was quick and easy. Sharpened 5 chains from 8" to 16 in in about 45 minutes. Chains are as good as new. Actually don't remember them cutting this good when new!
Saw about 10 people using various computer printed coupons at the HF store!

Chuck

User avatar
ken572
Posts: 2600
Joined: Sun Mar 14, 2010 8:11 pm
Location: Mesa, Arizona. 85201-1517

Re: Need an HF Coupon

Post by ken572 » Thu Aug 13, 2015 6:00 pm

chucketn wrote:Thanks, Ken.

I got a 20% coupon from Valpak.com, printed it out, and got an HF chainsaw sharpener. Got a tree down in the front yard. Setup was quick and easy. Sharpened 5 chains from 8" to 16 in in about 45 minutes. Chains are as good as new. Actually don't remember them cutting this good when new!
Saw about 10 people using various computer printed coupons at the HF store!

Chuck
Hello :!: Chuck :D

You are very welcome. :wink:

Ken. :)
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.

piro222
Posts: 1
Joined: Wed Aug 12, 2015 9:29 pm
Location: Cornelius, Orygun

Re: Need an HF Coupon

Post by piro222 » Fri Aug 14, 2015 1:52 am

Here's a link to our local community coupon clipper rag ... http://www.clipperclipper.com/current/W ... 150905.pdf ... the HF coupons are on page 2 including 20% off coupon and a free screwdrivers 'pon ... might be a bit far to drive to use the $2 off a pizza at the local pizza joint for most folks though :) unless you're in this area, but I think the HF coupons are good at any store from coast to coast 8) . I've gotten enough screwdriver sets and 3.5" LED flashlights to set up a "Screwdriver-N-Flashlight" Store :roll: .

User avatar
ken572
Posts: 2600
Joined: Sun Mar 14, 2010 8:11 pm
Location: Mesa, Arizona. 85201-1517

Re: Need an HF Coupon

Post by ken572 » Fri Aug 14, 2015 5:30 am

piro222 wrote:Here's a link to our local community coupon clipper rag ... http://www.clipperclipper.com/current/W ... 150905.pdf ... the HF coupons are on page 2 including 20% off coupon and a free screwdrivers 'pon ... might be a bit far to drive to use the $2 off a pizza at the local pizza joint for most folks though :) unless you're in this area, but I think the HF coupons are good at any store from coast to coast 8) . I've gotten enough screwdriver sets and 3.5" LED flashlights to set up a "Screwdriver-N-Flashlight" Store :roll: .
Good Morning :!: piro222 :D

Thanks for sharing your find. 8)

Ken. :)
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.

Post Reply