Gatling Gun
Re: Gatling Gun
If you can describe in detail the problem you have, I may be able to suggest a method that will yield the desired results.
Harold
Harold
Wise people talk because they have something to say. Fools talk because they have to say something.
-
- Posts: 214
- Joined: Thu Aug 11, 2011 2:32 am
Re: Gatling Gun
Hell, !!, you can't give up yet , old Custer is waiting for it. Hmmmm, I can do 45-70 barrels, mite take me a few years for eight, but just think of it when I turn up at the annual black powder cannon shoot with it, while there`s bullets in the air there`s hope. Homebrew.357.
Re: Gatling Gun
solek wrote:Hit another rock! You have 10 barrels/bolts, that you have to set head space on. To get it right you have to get the barrel to bolt set +/- about .0005". I have the go/no-go gauges, but get my skills, to the point, to cut the bolts/barrels, right, is lacking! The rest of the parts, work well!
Gun looks good, but it is not a shooter, yet. Someday?
Solek
I have a few years experience with the RG-G
If you would like any help send me a message
It’s only a hobby
Re: Gatling Gun
This is a RG-G inspired build with 6 barrels.
First test firing.
A little less work and money, but still lots of fun.
https://www.youtube.com/watch?v=dt_nHaUohuY
First test firing.
A little less work and money, but still lots of fun.
https://www.youtube.com/watch?v=dt_nHaUohuY
Re: Gatling Gun
Geezer wrote: ↑Sat Dec 16, 2017 11:15 am Just another RG-G with a new Look
Try this
https://www.youtube.com/watch?v=9WbRpjlacwQ
Re: Gatling Gun
These are RG-G inspired build with 6 barrels, for grandsons
Re: Gatling Gun
Wow! Very nice!
I'd enjoy reading a little about them. Care to share some of your experiences?
H
I'd enjoy reading a little about them. Care to share some of your experiences?
H
Wise people talk because they have something to say. Fools talk because they have to say something.
Re: Gatling Gun
I just finished making all the parts for the RGG gun. Presently making the yoke and trunion assy to support it on a surveyors tripod for assembly and tuning.
It has taken me several months of spare time and probably cost close to $2000 in parts materials and tools. So far I think every part is functional but Ill know better in a week. I made it for a 50 round stick mag.
It has taken me several months of spare time and probably cost close to $2000 in parts materials and tools. So far I think every part is functional but Ill know better in a week. I made it for a 50 round stick mag.