Does anyone out there have a source for a 7" driver (57" prototype) with a SQUARE counter weight, 12 spokes (4 on the counter weight, 8 open)?
JP
Looking for small sqaure driver
- johnpenn74
- Posts: 404
- Joined: Tue May 04, 2010 12:54 pm
- Location: Waiting for next assignment!
Looking for small sqaure driver
John Pennington
Logging meets that actually move logs
Project
2 Mich-Cal Shays
Allen 4-4-0 Narrow Gauge Conversion
Two Reading A5a Camelback 0-4-0
USRA 0-6-0
Clishay
4 Western Wheeled Scraper NG Dump Cars
N&W 4-8-2
ICM 2-10-2
4 Modern Stake Cars
L&N Caboose
4 Big Four Conversion Gondolas
Like I'm actually gonna build all this stuff
Logging meets that actually move logs
Project
2 Mich-Cal Shays
Allen 4-4-0 Narrow Gauge Conversion
Two Reading A5a Camelback 0-4-0
USRA 0-6-0
Clishay
4 Western Wheeled Scraper NG Dump Cars
N&W 4-8-2
ICM 2-10-2
4 Modern Stake Cars
L&N Caboose
4 Big Four Conversion Gondolas
Like I'm actually gonna build all this stuff
- Bill Shields
- Posts: 10459
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: Looking for small sqaure driver
a crescent driver with durham water putty to fill and and 'square out' works if you cannot find anything else.
Too many things going on to bother listing them.
-
- Posts: 1724
- Joined: Thu Jan 09, 2003 6:50 pm
- Location: Michigan, USA
Re: Looking for small sqaure driver
I don't know of any that meet your specification exactly. I have 6 drivers I got from Power Model Supply back in 1988 that have 13 spokes and a square counterweight that covers 5 spokes. It is slightly larger than you are looking for, the ones I have are 7 1/4" across the tread. The ones I have are not available, they are from a Mogul I have torn down to rebuild. I don't know what happened to the pattern - it may have been lost when PMS burned down.
-
- Posts: 1724
- Joined: Thu Jan 09, 2003 6:50 pm
- Location: Michigan, USA
Re: Looking for small sqaure driver
Another possibility is the Colorado Midland Ten-Wheeler drivers from Rogers-Cooke. They have 15 spokes and a square end counterweight that covers 5 spokes. They look like they would finish to a 7 " diameter. You could check with Bill Holder and see if he still has some.
-
- Posts: 114
- Joined: Mon Sep 03, 2007 10:19 pm
- Location: Creston Iowa
Re: Looking for small sqaure driver
The Winton Mogul has 7" drivers with a square conter weight. I don't have a picture on this computer to add. I don't know if they are available any more. The last Winton website is down.
Wayne
Wayne
Re: Looking for small sqaure driver
Check with Martin Model & Pattern. My pattern for the wheel you might be looking for now belongs to them.
7.00 dia, light & heavy counterweights
AMc
7.00 dia, light & heavy counterweights
AMc