Freight Track identification

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: cbrew, Harold_V

User avatar
johnpenn74
Posts: 404
Joined: Tue May 04, 2010 12:54 pm
Location: Waiting for next assignment!

Freight Track identification

Post by johnpenn74 »

Does anyone recognize this freight truck bolster? The aluminum broke. I would like to find a replacement.

JP
Attachments
1028171545.jpg
1028171545a.jpg
John Pennington

Logging meets that actually move logs

Project
2 Mich-Cal Shays
Allen 4-4-0 Narrow Gauge Conversion
Two Reading A5a Camelback 0-4-0
USRA 0-6-0
Clishay
4 Western Wheeled Scraper NG Dump Cars
N&W 4-8-2
ICM 2-10-2
4 Modern Stake Cars
L&N Caboose
4 Big Four Conversion Gondolas

Like I'm actually gonna build all this stuff :-P
Pat Fahey
Posts: 147
Joined: Sun Oct 23, 2011 10:45 am

Re: Freight Track identification

Post by Pat Fahey »

Hi John
Going by the side frame it looks like one of Bill vanBrocklin design trucks because you did not state what scale. Just a guess, hope it helps. Pat WLS
User avatar
makinsmoke
Posts: 2260
Joined: Thu Jul 10, 2003 12:56 pm
Location: Texas Hill Country

Re: Freight Track identification

Post by makinsmoke »

Railroad Supply?
BClemens
Posts: 475
Joined: Sat Oct 08, 2016 10:04 pm
Location: Gloucester, VA (Sassafras)

Re: Freight Track identification

Post by BClemens »

makinsmoke wrote:Railroad Supply?
Agree - the set w/o brake hangers. Looks like a case for CI bolsters.
User avatar
slsf1060
Posts: 176
Joined: Fri Jun 06, 2003 5:18 pm
Location: Dallas, Texas

Re: Freight Track identification

Post by slsf1060 »

BClemens wrote:
makinsmoke wrote:Railroad Supply?
Agree - the set w/o brake hangers. Looks like a case for CI bolsters.

I was thinking the same thing, but didn't remember RRS having those cast on rocker points on top of the bolster like these have.
Darren McNeely

and the sons of Pullman Porters, and the sons of engineers,
ride their father's magic carpets made of steel.

www.swlsonline.org
User avatar
makinsmoke
Posts: 2260
Joined: Thu Jul 10, 2003 12:56 pm
Location: Texas Hill Country

Re: Freight Track identification

Post by makinsmoke »

The round thing above the springs?

That looks like something drilled and installed
there.

I've seen plenty of these broken. Usually the outside flange of the spring tab. I've never seen one broken just outside the wear block.

That's weird.
Pontiacguy1
Posts: 1566
Joined: Thu Apr 26, 2012 10:15 am
Location: Tennessee, USA

Re: Freight Track identification

Post by Pontiacguy1 »

Best thing to do, in my opinion, if you want to get the trucks fixed and back up and running, get yourself a piece of aluminum and just make another bolster on the milling machine. It might not look like the casting, but it will be much stronger and with most of it sitting there between the side frames anyway, it wouldn't be very noticeable. That's what I would do if it were my set of trucks.
BClemens
Posts: 475
Joined: Sat Oct 08, 2016 10:04 pm
Location: Gloucester, VA (Sassafras)

Re: Freight Track identification

Post by BClemens »

7075
steamingdon
Posts: 604
Joined: Sun Feb 22, 2009 9:21 pm
Location: massachusetts,usa

Re: Freight Track identification

Post by steamingdon »

trucks or tracks ? :D
steamer
BClemens
Posts: 475
Joined: Sat Oct 08, 2016 10:04 pm
Location: Gloucester, VA (Sassafras)

Re: Freight Track identification

Post by BClemens »

steamingdon wrote:trucks or tracks ? :D
Is 7075 rail available? Who would need steel rail?

Truck sideframes and bolters NC machined from solid 7075 stock would be stronger than ductile iron and easier to manufacture by CNC machining than casting....but in my personal estimation/opinion; aluminum is for airplanes - not railroad parts. I bought recently a bunch of arch bar truck parts (2 1/2" scale) and they seem like model train parts; not for any robust heavy use. Cast aluminum is mealy and soft - usually 356 AL. Compensate for its use by making necessary chunky and over scale looking parts that will probably still not be adequate in strength.

Why would anyone make siderods of cast aluminum? I bit - I bought some years ago thinking they must be adequate in strength - it turns out to be for ease of manufacture to sell - disregard damaging a piece of finished machanical equipment.

It's been a great day! Please don't forget that this is a discussion..IMO

BC
Last edited by BClemens on Thu Nov 16, 2017 6:13 pm, edited 1 time in total.
User avatar
makinsmoke
Posts: 2260
Joined: Thu Jul 10, 2003 12:56 pm
Location: Texas Hill Country

Re: Freight Track identification

Post by makinsmoke »

Re: my previous post about the location of the break.

That threaded? protrusion above the springs...

Could that have contributed to the bolster breaking where it did?
User avatar
makinsmoke
Posts: 2260
Joined: Thu Jul 10, 2003 12:56 pm
Location: Texas Hill Country

Re: Freight Track identification

Post by makinsmoke »

And keep in mind Guys this bolster is at least forty years old, and chances are it had a hard and unguarded life.

I understand that steel and possibly iron would be a better selection for base material today, but in a business sense I would say the Railroad got its money's worth from that purchase.
Post Reply