Hardening a gunbox

Topical Discussions include anything pertaining to Gunsmithing.

Moderators: Harold_V, JackF, GeorgeGaskill

User avatar
Posts: 7322
Joined: Sat Jan 17, 2009 7:55 pm
Location: Florida

Re: Hardening a gunbox

Post by SteveHGraham » Mon Apr 16, 2018 9:56 pm

Truck maneuverability is the reason I went with a folding AK. I didn't ever want to face a situation in which I was struggling to get a full-length rifle past a windshield or door pillar. I considered getting an AK pistol even though it's kind of a novelty gun, but I thought it was worth it to put up with a somewhat longer gun in order to get something I could hold onto better.

I thought I had a nice cheap solution to the truck problem. Now I see that AK prices have gone completely insane, so the weapon I thought would be cheap to replace if stolen is actually close to the price of an AR. The Vz58 is no help, because their prices have gone nuts, too.

I'm amazed by AK inflation. No matter how well they work, they're still cheesy guns that cost little to produce. It's bizarre, being able to get a real, machined AR-15 for less than a stamped AK-47. Not that I would want an AR-15, but at least when you buy one, you can see what you paid for.
Every hard-fried egg began life sunny-side up.

User avatar
Posts: 4659
Joined: Wed May 17, 2006 8:21 pm
Location: Phoenix, AZ

Re: Hardening a gunbox

Post by BadDog » Mon Apr 16, 2018 10:55 pm

Agreed. The M17S is no longer available and brings considerably more than I have in mine. If I were to lose it, I would probably get a Mini-14 and add one of the nice bullpup kits. A friend of mine had a pretty trick little Mini-14 that also ran dependably. Then again, I haven't been in the market, so no idea what the price on those has done.
Master Floor Sweeper

Post Reply