Allens Models Parts ****ALL SOLD****

For the Buying/Selling/Trading of items of interest to those of us in the Live Steam Hobby.

Moderators: gwrdriver, Harold_V

Post Reply
User avatar
ChipsAhoy
Posts: 319
Joined: Wed Feb 18, 2015 12:23 pm
Location: Arizona

Allens Models Parts ****ALL SOLD****

Post by ChipsAhoy »

I don't want to but I have the following Allens parts for sale, you'll find most (not all if purchased individually) of these are 50% of current cost. For better pictures or descriptions see the Allens site. If you buy the whole lot it is right at half off. I won't break down the sets any further than I have below. Can be seen or picked up from me at Maricopa Live Steamers or buyer pays shipping and I will flat rate to you if you wish.
M211 SMOKE STACK, M200 SMOKE BOX DOOR, M208B SMOKE BOX BOTTOM, AND M208A SMOKE BOX TOP ALL ALUMINUM. THE SET$125.00
M212 BELL KIT W/OUT ARM $75.00
M211T SAND DOME TOP, M211B SAND DOME BASE, M219 STEAM DOME BASE, M219 STEAM DOME TOP, ALL ALUMINUM, THE SET $40.00
M223 REV QUAD UPPER, REV QUAD LOWER, REV QUAD YOKE. THE SET $45.00
M165, 2 EA. STEAM CHEST COVERS BRONZE THE PAIR $30.00
M189-2 LINK AND BLOCK, ELECTRO-WIRE CUT BY ALLENS MODELS THE PAIR $200.00
M 183 PUMP HEAD, BRONZE ONE EA. $12.00
M310B THROTTLE BODY M310A THROTTLE ARM BRONZE, THE PAIR $17.00
4 EA. STEAM ACTUATED CYLINDER DRAIN COCKS, PRE MANFACTURED. THE SET $100.00
M216R RIGHT SIDE CAB, M216L LEFT SICE CAB, M215 CAB ROOF WITH VDNT COVER, M218 2X CAB DOOR, M217 CAB REAR, M217F CAB FRONT, THE SET $250.00
M139 3 EA. BRAKE EQUALIZER BARS THE SET $14.40
M150 CROSS HEAD PAIR, M153 CROSS HEAD YOKE PAIR, M154 CROSS HEAD YOKE BOTTOM SUPPORT. THE SET $43.00
M144 2EA FRONT SIDE RODS, M145 2EA BACK SIDE RODS, T147 MAIN RODS. ALL ALUMINUM, THE SET $145.00
M156 ONE CYLINDER, M160 ONE STEAM CHEST, THESE TWO ONLY, $92.00.
RUNNING BOARDS, ALUMINUM, THE PAIR, $45.00.
OR, EVERYTHING LISTED AND IN THE PHOTO, $1000.00
I APPOLOGIZE NOW IF I HAVE MISSED TYPED SOMETHING...
Scotty
Attachments
20180423_123510.jpg
20180423_124234.jpg
20180423_124733.jpg
User avatar
ChipsAhoy
Posts: 319
Joined: Wed Feb 18, 2015 12:23 pm
Location: Arizona

Re: Allens Models Parts

Post by ChipsAhoy »

The reverse links are sold.
I do not have a Allens Part number for the running boards, it doesn't appear that they offer them any longer.
Only one cylinder and steam chest to sell... sry.
I am having trouble responding to some of the PMs. I type a response, but it seems Chaski doesn't forward them for some reason. So if you have sent a PM, double check that it actually did send and I will respond..... if I can! Lol,
Scotty
User avatar
Harlock
Posts: 3833
Joined: Tue Jan 23, 2007 1:19 am
Contact:

Re: Allens Models Parts

Post by Harlock »

If they are Mogul running boards, they are M309R-1 Right Running Board and M309L-1 Left Running Board. Steve recently was able to have these cast again and they will be available on the site in the future.

Best,

-Mike
Live Steam Photography and more - gallery.mikemassee.com
Product Development and E-Commerce, Allen Models of Nevada
User avatar
Harold_V
Posts: 20248
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Allens Models Parts

Post by Harold_V »

ChipsAhoy wrote: Tue Apr 24, 2018 9:50 am I am having trouble responding to some of the PMs. I type a response, but it seems Chaski doesn't forward them for some reason.
I'm inclined to think that it isn't the board, but the recipient simply not paying attention to PM's. Here's how you can determine which it is.
When you send a PM, it should appear in your Outbox. When it is opened by the recipient, it then should be moved to your Sent box.

If you send and it remains unopened, it will remain in your Outbox indefinitely.

H
Wise people talk because they have something to say. Fools talk because they have to say something.
User avatar
ChipsAhoy
Posts: 319
Joined: Wed Feb 18, 2015 12:23 pm
Location: Arizona

Re: Allens Models Parts

Post by ChipsAhoy »

Ahhh, I remember that now, for us slow thinkers maybe the outbox should be named, "Msg Recvd Box".
Thx for the reply
Scotty
User avatar
Harold_V
Posts: 20248
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Allens Models Parts

Post by Harold_V »

ChipsAhoy wrote: Tue Apr 24, 2018 3:43 pm Ahhh, I remember that now, for us slow thinkers maybe the outbox should be named, "Msg Recvd Box".
Thx for the reply
Scotty
Yep! That would make more sense. A suggestion that might prove fruitful if given to those responsible for the software used on the board. I'll see to it that Mike is aware.

H
Wise people talk because they have something to say. Fools talk because they have to say something.
User avatar
ChipsAhoy
Posts: 319
Joined: Wed Feb 18, 2015 12:23 pm
Location: Arizona

Re: Allens Models Parts

Post by ChipsAhoy »

The running boards are sold!
Scotty
User avatar
ChipsAhoy
Posts: 319
Joined: Wed Feb 18, 2015 12:23 pm
Location: Arizona

Re: Allens Models Parts

Post by ChipsAhoy »

Cylinder cocks are sold.
User avatar
Harold_V
Posts: 20248
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Allens Models Parts

Post by Harold_V »

In regards to the private message situation on the board, it has been brought to Mike's attention. He will see what can be done in the near future. Right now he is unable. He thanks you for your suggestion, which he takes seriously.

H
Wise people talk because they have something to say. Fools talk because they have to say something.
User avatar
ChipsAhoy
Posts: 319
Joined: Wed Feb 18, 2015 12:23 pm
Location: Arizona

Re: Allens Models Parts ***ALL SOLD*** thx

Post by ChipsAhoy »

All that matters is sold
Post Reply