Mmmmmmm.... Sandwich....AnthonyDuarte wrote:Could use a rotary table, sure. But if Wire EDM is available the accuracy and surface finish are hard to beat. Not to mention it cuts hardened steel like butter. And while it’s cutting you can go eat a sandwich or something.
Show of Interest - Walschaerts Links - 1" Scale
Moderators: gwrdriver, Harold_V
Re: Show of Interest - Walschaerts Links - 1" Scale
Re: Show of Interest - Walschaerts Links - 1" Scale
Hi Mike,
To answer your question, I might take a set or two or even three depending on the price.
thanks,
SteveR
To answer your question, I might take a set or two or even three depending on the price.
thanks,
SteveR
12x36 Enco Lathe, 9x42 Bridgeport, SMAW, O/A, Miller MIG w/gas, plasma
Not enough measuring tools...
1.5" Allen Models Consolidation on air.
1" FEF in progress
1" & 3/4" LE Projects
I'm thankful that metal is recyclable....
Not enough measuring tools...
1.5" Allen Models Consolidation on air.
1" FEF in progress
1" & 3/4" LE Projects
I'm thankful that metal is recyclable....