Quality Pegboard Hooks
Moderator: Harold_V
- SteveHGraham
- Posts: 7788
- Joined: Sat Jan 17, 2009 7:55 pm
- Location: Florida
Quality Pegboard Hooks
I chose a nice prefab workbench for my upstairs hangout. It came with a pegboard. They included a certain number of pegboard hooks and so on, but not enough.
I want to get some more pegboard tool hangers, but because the ones I have already are nice and sturdy, I don't want to waste my money on Chinese stuff made from coat hanger wire.
Is there a particular brand of pegboard hardware I should be looking at
I have a feeling this question isn't going anywhere, but I had to try.
I want to get some more pegboard tool hangers, but because the ones I have already are nice and sturdy, I don't want to waste my money on Chinese stuff made from coat hanger wire.
Is there a particular brand of pegboard hardware I should be looking at
I have a feeling this question isn't going anywhere, but I had to try.
Every hard-fried egg began life sunny-side up.
Re: Quality Pegboard Hooks
Check out the Garrett Wade site for their Talon Holders PN 09K01.01 thru .11 GarrettWade.com
I have no experience with the hangars, but trust GW for other stuff.
--earlgo
I have no experience with the hangars, but trust GW for other stuff.
--earlgo
Before you do anything, you must do something else first. - Washington's principle.
- warmstrong1955
- Posts: 3568
- Joined: Thu Mar 18, 2010 2:05 pm
- Location: Northern Nevada
Re: Quality Pegboard Hooks
I put up a bunch of pegboards after I drywalled my shop. My youngest bought me some peg sets, from Horror Freight.
Biggest problem, is they are 1/4” wire, and most pegboard has 9/32” holes. Take something off the pegboard, and the peg often comes with it.
I get mine at the hardware store, or the ranch store. They have pegs made 9/32” diameter wire, that fit tight in the hole. That, and the welded ones are welded....unlike many of the HF ones that look welded, but break apart.
Bill
Biggest problem, is they are 1/4” wire, and most pegboard has 9/32” holes. Take something off the pegboard, and the peg often comes with it.
I get mine at the hardware store, or the ranch store. They have pegs made 9/32” diameter wire, that fit tight in the hole. That, and the welded ones are welded....unlike many of the HF ones that look welded, but break apart.
Bill
Today's solutions are tomorrow's problems.
- SteveHGraham
- Posts: 7788
- Joined: Sat Jan 17, 2009 7:55 pm
- Location: Florida
Re: Quality Pegboard Hooks
Ranch store...Tractor Supply? Now that I live in the USA, I have access to one.
Every hard-fried egg began life sunny-side up.
- warmstrong1955
- Posts: 3568
- Joined: Thu Mar 18, 2010 2:05 pm
- Location: Northern Nevada
Re: Quality Pegboard Hooks
Again....Welcome to America!
We don't have a Tractor Supply. We have Big R, which is pretty much the same.
Good folks that work there. If you can't find something, they stop what they are doing, and will lead you right to it. At Walmart, it's hard to get anyone to even point. I've been to a Tractor Supply in Arizona, and they were the same as the Big R folks.
Bill
We don't have a Tractor Supply. We have Big R, which is pretty much the same.
Good folks that work there. If you can't find something, they stop what they are doing, and will lead you right to it. At Walmart, it's hard to get anyone to even point. I've been to a Tractor Supply in Arizona, and they were the same as the Big R folks.
Bill
Today's solutions are tomorrow's problems.
Re: Quality Pegboard Hooks
Not peg board, but in my garage I use the rubbermaid quick rail system. Just bought a few more sections and 6 shelves. Not the cheapest but completely modular and customizable. Guess you could fab up a pegboard that clips into their rail system. Hmm...
Sent from my SM-G950U1 using Tapatalk
Sent from my SM-G950U1 using Tapatalk
- SteveHGraham
- Posts: 7788
- Joined: Sat Jan 17, 2009 7:55 pm
- Location: Florida
Re: Quality Pegboard Hooks
At the risk of inviting verbal abuse, I will post a photo of the bench. I know real men are supposed to make their own benches, but this thing is incredible. Sturdy as it can be, and it comes with an LED fixture, pegboard, and a power strip. Grommets put the cords behind the bench. The top is hardwood, and it probably weighs 80 pounds by itself. The drawer has ball-bearing slides. For a little indoor bench, it's perfect.
The manual was clearly written. The bench is full of threaded lags, and they provide a screwdriver and wrench. You put the screws into the lags and tighten it up. Very nice. There was a little bag filled with extra fasteners, too.
The manual was clearly written. The bench is full of threaded lags, and they provide a screwdriver and wrench. You put the screws into the lags and tighten it up. Very nice. There was a little bag filled with extra fasteners, too.
Every hard-fried egg began life sunny-side up.
- warmstrong1955
- Posts: 3568
- Joined: Thu Mar 18, 2010 2:05 pm
- Location: Northern Nevada
Re: Quality Pegboard Hooks
Yours looks like the two I got when I was in Alaska, just a little smaller, for our electrical bench, when we moved into our new shop building. It was summer, and we didn't have time to build our own, so I bought two and put them end to end and bolted them together.
Good benches, and the drawers were also on ball bearing slides. Excellent for building & repairing electrical enclosures. Plan was to build a bench later....but they were still there when I left. No reason to replace them.
Bill
Good benches, and the drawers were also on ball bearing slides. Excellent for building & repairing electrical enclosures. Plan was to build a bench later....but they were still there when I left. No reason to replace them.
Bill
Today's solutions are tomorrow's problems.
Re: Quality Pegboard Hooks
I went to a garage sale and they had a five-gallon bucket of pegboard hooks. I bought a gallon of them, so I have a lifetime supply.
Maybe search craigslist.
Steve
Maybe search craigslist.
Steve
- SteveHGraham
- Posts: 7788
- Joined: Sat Jan 17, 2009 7:55 pm
- Location: Florida
Re: Quality Pegboard Hooks
This thing is amazing. The Chinese are starting to scare me.
Every hard-fried egg began life sunny-side up.
Re: Quality Pegboard Hooks
Don't worry, simply visit China to fix that.SteveHGraham wrote:This thing is amazing. The Chinese are starting to scare me.
Sent from my SM-G950U1 using Tapatalk
- SteveHGraham
- Posts: 7788
- Joined: Sat Jan 17, 2009 7:55 pm
- Location: Florida
Re: Quality Pegboard Hooks
I've watched a ton of Youtubes from English speakers living in China. Very strange. No one can drive. Everyone is superstitious. They have all kinds of customs that make no sense and cause terrible problems. I don't know how they manage to get to work every day and make stuff for Harbor Freight.
Every hard-fried egg began life sunny-side up.