Hi everyone,
Just wanted to share a few pictures of the 1918A machined and assembled. There are some things still to work out with the castings before they go into production, but I wanted to have something more than a CAD model to show.
Enjoy,
Anthony
Eccentric Engineer
Nathan 1918A Injector pre-production sample
- AnthonyDuarte
- Posts: 492
- Joined: Tue Jan 19, 2010 10:46 am
- Location: Orange, CA
- Contact:
- JBodenmann
- Posts: 3865
- Joined: Sun Oct 26, 2003 1:37 pm
- Location: Tehachapi, California
Re: Nathan 1918A Injector pre-production sample
Hello My Friends
What Jim said and more!
Jack
What Jim said and more!
Jack
- Short Line Tom
- Posts: 60
- Joined: Tue Jan 03, 2017 9:35 pm
- Location: Römerberg/Germany
Re: Nathan 1918A Injector pre-production sample
Mind-blowing!
Cheers!
Tom
Cheers!
Tom
-
- Posts: 582
- Joined: Tue Jul 31, 2012 1:59 pm
- Location: Germany, Duesseldorf
Re: Nathan 1918A Injector pre-production sample
What a wounderful model, congratulations!
Eastimated this device will work as excellent as tne small EE injector already does, nothing else will be desirable any more!
Asteamhead
Eastimated this device will work as excellent as tne small EE injector already does, nothing else will be desirable any more!
Asteamhead
- Steamchris
- Posts: 487
- Joined: Fri Jan 27, 2012 3:48 pm
- Location: Duisburg/Germany
- Contact:
Re: Nathan 1918A Injector pre-production sample
Thats absolutly outstanding!!!
Regards
Chris
Regards
Chris
The light at the end of the tunnel could be a train
Health and Safety Notice
due to the current economic circumstances , the light at the end of the tunnel
has been switched off !
Health and Safety Notice
due to the current economic circumstances , the light at the end of the tunnel
has been switched off !
Re: Nathan 1918A Injector pre-production sample
You have done what others have only dreamed about. So much for doing things the old way when you get perfect results doing it the new way. Keep up the good work and high quality we have come to expect from your wonderful products. Richard