Nathan 1918A Injector pre-production sample

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: cbrew, Harold_V

Post Reply
User avatar
AnthonyDuarte
Posts: 491
Joined: Tue Jan 19, 2010 10:46 am
Location: Orange, CA
Contact:

Nathan 1918A Injector pre-production sample

Post by AnthonyDuarte »

Hi everyone,

Just wanted to share a few pictures of the 1918A machined and assembled. There are some things still to work out with the castings before they go into production, but I wanted to have something more than a CAD model to show.

Enjoy,
Anthony
Eccentric Engineer

1918A
1918A
1918A
1918A
1918A with 1921 Starter Valve
1918A with 1921 Starter Valve
1918A with 1921 starter valve
1918A with 1921 starter valve
JKreider
Posts: 311
Joined: Fri Oct 07, 2005 8:38 pm
Location: Redlands, CA

Re: Nathan 1918A Injector pre-production sample

Post by JKreider »

WOW!!!
User avatar
JBodenmann
Posts: 3855
Joined: Sun Oct 26, 2003 1:37 pm
Location: Tehachapi, California

Re: Nathan 1918A Injector pre-production sample

Post by JBodenmann »

Hello My Friends
What Jim said and more!
Jack
User avatar
NP317
Posts: 4557
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon, USA

Re: Nathan 1918A Injector pre-production sample

Post by NP317 »

OH MY!
~RN
User avatar
Short Line Tom
Posts: 60
Joined: Tue Jan 03, 2017 9:35 pm
Location: Römerberg/Germany

Re: Nathan 1918A Injector pre-production sample

Post by Short Line Tom »

Mind-blowing!

Cheers!
Tom
Asteamhead
Posts: 582
Joined: Tue Jul 31, 2012 1:59 pm
Location: Germany, Duesseldorf

Re: Nathan 1918A Injector pre-production sample

Post by Asteamhead »

What a wounderful model, congratulations!
Eastimated this device will work as excellent as tne small EE injector already does, nothing else will be desirable any more!
Asteamhead
User avatar
Steamchris
Posts: 481
Joined: Fri Jan 27, 2012 3:48 pm
Location: Duisburg/Germany
Contact:

Re: Nathan 1918A Injector pre-production sample

Post by Steamchris »

Thats absolutly outstanding!!!

Regards
Chris
The light at the end of the tunnel could be a train ;)

Health and Safety Notice

due to the current economic circumstances , the light at the end of the tunnel
has been switched off !
optigman
Posts: 124
Joined: Wed Jul 15, 2015 11:17 pm

Re: Nathan 1918A Injector pre-production sample

Post by optigman »

You have done what others have only dreamed about. So much for doing things the old way when you get perfect results doing it the new way. Keep up the good work and high quality we have come to expect from your wonderful products. Richard
Post Reply