OT: Building in isolated location

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

User avatar
BadDog
Posts: 4794
Joined: Wed May 17, 2006 8:21 pm
Location: Phoenix, AZ

Re: OT: Building in isolated location

Post by BadDog » Mon Feb 25, 2019 6:03 pm

Fantastic! Doesn't get any better than that.
Russ
Master Floor Sweeper

Inspector
Posts: 619
Joined: Mon Feb 23, 2009 4:25 am
Location: Saskatoon, SK, Canada

Re: OT: Building in isolated location

Post by Inspector » Tue Feb 26, 2019 1:41 pm

Cool! So when are you building the observatory? :)

Pete

User avatar
seal killer
Posts: 4475
Joined: Sat Aug 18, 2007 10:58 pm
Location: The Land Of Oz (Ahhh, Kansas!)

Re: OT: Building in isolated location

Post by seal killer » Tue Feb 26, 2019 9:58 pm

Pete--

On the astronomy subject (to be precise, the astrophotography subject), I brought enough stuff into the house from the garage that I found components of my mount!

I haven't found a good place close to the house to build the observatory. I'm looking at a spot about a half mile from here. Of course, it will need a bed and "stuff."

--Bill
You are what you write.

Inspector
Posts: 619
Joined: Mon Feb 23, 2009 4:25 am
Location: Saskatoon, SK, Canada

Re: OT: Building in isolated location

Post by Inspector » Wed Feb 27, 2019 12:23 pm

There is a road off Highway 3 on the way out of Osoyoos in southern BC leading to a group of houses in Observatory ridge / drive on the top of a mountain. All the places have observatories either built into the house or beside them. Bet you are wishing you thought of that when you were designing yours eh? ;)

John Hasler
Posts: 1271
Joined: Tue Dec 06, 2016 4:05 pm
Location: Elmwood, Wisconsin

Re: OT: Building in isolated location

Post by John Hasler » Wed Feb 27, 2019 5:07 pm

Surely you don't want your observatory close to the house. Convection currents can ruin the seeing.

User avatar
seal killer
Posts: 4475
Joined: Sat Aug 18, 2007 10:58 pm
Location: The Land Of Oz (Ahhh, Kansas!)

Re: OT: Building in isolated location

Post by seal killer » Wed Feb 27, 2019 6:27 pm

Pete and John--

Re: "Bet you are wishing you thought of that when you were designing yours eh?"

Pete, if I had built in a spot that was more bare of trees than this one, I would have certainly considered such a thing. I can't bear to cut down a beautiful tree and I've got some nice ones around the house. If I could figure out a way to get a solid mount on an artificial tower--say, about 15' high--I might clear enough of the treetops by 10pm to view until dawn.

Re: "Convection currents can ruin the seeing."

John, I would LIKE to have an observatory within easy walking distance at oh-dark-thirty, especially WAY OUT here! Although I had not thought of convection currents from the house disturbing the "seeing", there is a possibility.

--Bill
You are what you write.

Inspector
Posts: 619
Joined: Mon Feb 23, 2009 4:25 am
Location: Saskatoon, SK, Canada

Re: OT: Building in isolated location

Post by Inspector » Thu Feb 28, 2019 11:08 am

I could think of lots of ideas but you have to come up with the money to make it. :) Like a small version of a forest fire lookout tower. You could even use some of your logs if you sit them on steel anchors pads above concrete bases so they won't rot. You'll figure out something eventually. ;)

Pete

User avatar
warmstrong1955
Posts: 3384
Joined: Thu Mar 18, 2010 2:05 pm
Location: Northern Nevada

Re: OT: Building in isolated location

Post by warmstrong1955 » Thu Feb 28, 2019 5:04 pm

Finally got some speed back, and looked at your vid Bill.
Nice! Really nice!
When ya gonna show us the important part? (Your shop)

;)

Other Bill
Today's solutions are tomorrow's problems.

User avatar
seal killer
Posts: 4475
Joined: Sat Aug 18, 2007 10:58 pm
Location: The Land Of Oz (Ahhh, Kansas!)

Re: OT: Building in isolated location

Post by seal killer » Thu Feb 28, 2019 6:29 pm

Bill--

I cleared out the space in the garage for the shop yesterday. Tomorrow I'll start initial framing. When I get a stick or two stood up, I'll take a picture and post it on a new thread.

I am eager to get that project completed. My machinery has been stored all this time in a temperature and humidity controlled storage space. It needs to come to its new home!

--Bill
You are what you write.

User avatar
warmstrong1955
Posts: 3384
Joined: Thu Mar 18, 2010 2:05 pm
Location: Northern Nevada

Re: OT: Building in isolated location

Post by warmstrong1955 » Thu Feb 28, 2019 7:48 pm

Yeah....the fun stuff always comes last, doesn't it!
(Always has for me)

Other Bill
Today's solutions are tomorrow's problems.

Post Reply