removing an awkward flywheel

This Forum is dedicated to the Hobbyist I.C. (Internal Combustion) Engine Community.

Moderators: Harold_V, JackF

spro
Posts: 7640
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: removing an awkward flywheel

Post by spro » Sun Mar 24, 2019 6:38 pm

There has been many useful tips and procedures since my post. It is over, thus far. He managed to dig out the "off drilled" threads and secure it by another bolt. The flywheel never did move after all the attempts. He cleaned and set new points and ran some new wire and the engine gets spark.
It is over except for the fine recommendations.

Post Reply