Modeltec magazine - full listing of issues

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: Harold_V, WJH, cbrew

User avatar
Builder01
Posts: 558
Joined: Mon May 18, 2015 5:26 am
Location: Erie, PA

Re: Modeltec magazine - full listing of issues

Post by Builder01 » Sun Jun 09, 2019 8:03 am

Yes, is would be cool to have a copy of the index. Without access to the magazines. it would pretty much be useless though.
David

bill4227
Posts: 86
Joined: Mon Oct 25, 2010 3:49 pm
Location: Taneytown, MD

Re: Modeltec magazine - full listing of issues

Post by bill4227 » Sun Jun 09, 2019 6:46 pm

Modeltec Index from the same website as I posted above is here http://www.homemetalshopclub.org/librar ... eltec.html

Bill

Mike Walsh
Posts: 637
Joined: Sun May 06, 2007 10:14 pm
Location: St. Louis, MO

Re: Modeltec magazine - full listing of issues

Post by Mike Walsh » Mon Jun 10, 2019 6:32 am

bill4227 wrote:
Sun Jun 09, 2019 6:46 pm
Modeltec Index from the same website as I posted above is here http://www.homemetalshopclub.org/librar ... eltec.html

Bill
That index only goes to 1989, which is only a portion of what we are looking for.

User avatar
dnevil
Posts: 264
Joined: Fri Aug 03, 2012 10:19 am
Location: Springtown, Texas
Contact:

Re: Modeltec magazine - full listing of issues

Post by dnevil » Mon Jul 01, 2019 3:00 pm

I wrote to the C&O Historical Society to ask about their possible ownership of "Modeltec" magazine, and this was their reply:
C&O Historical Society does not have rights to Modeltec Magazine, nor any connection with it. The website you referenced in your message says we do. This is entirely incorrect and if you know how to correct it, we would appreciate it.

Other than our own magazine which we have published since 1969, the only other magazine to which we have rights and have published digital files is Bob Hundman's Mainline Modeler.
The original poster said "C&O Tech Society", but I could not find such a group on Google.

Regards,
Daris
Daris Nevil
IBLS Secretary
North American Region
http://www.ibls.org

GMORRISON
Posts: 1
Joined: Tue Jul 02, 2019 1:16 am

Re: Modeltec magazine - full listing of issues

Post by GMORRISON » Wed Jul 03, 2019 12:52 am

I have a complete set of MODELTEC mag. I would like to have an index CD copy if anyone the has one to make a copy of it. I would gladley pay you for it. I was building a Plymouth Switcher but the Mag. quit before Tom Artzberger,PE could finish his plans. Modeltec printed Parts 1 thru 9 and there probably was 10 or 12 to finish. does anyone know if Tom Artzberger ever printed his plans any where else ?

Mountaineer
Posts: 145
Joined: Sun Dec 02, 2007 4:45 pm
Location: Canada

Re: Modeltec magazine - full listing of issues

Post by Mountaineer » Wed Jul 03, 2019 11:25 am

Tom was reachable via the email on his PLE site Hartford Shops, www.tacllc.biz as of two years ago. Hopefully he's still active.

Mountaineer.

Post Reply