Flashers R Us
Moderators: gwrdriver, Harold_V
Flashers R Us
I may have been out of touch for a while, but does anyone know what became of Flashers R Us after the owner passed away? Has the business been picked up by anyone?
-
- Posts: 1566
- Joined: Thu Apr 26, 2012 10:15 am
- Location: Tennessee, USA
Re: Flashers R Us
I don't think it has. If someone is carrying it forward, they've kept it a secret.
-
- Posts: 983
- Joined: Wed Jun 27, 2012 5:24 pm
- Location: Marietta, Georgia
Re: Flashers R Us
I dont think it has been picked up. The owner passed late last year and then his wife passed early this year. So everything is in limbo with their kids right now as far as I know
-Tristan
Projects
-2.5" scale Class A 20 Ton Shay
Steam Siphon: https://www.shapeways.com/shops/leavitt ... tive-works
Projects
-2.5" scale Class A 20 Ton Shay
Steam Siphon: https://www.shapeways.com/shops/leavitt ... tive-works
-
- Posts: 1595
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Re: Flashers R Us
Most of the products Dave sold are available from the original manufacture.
What are you looking for?
Tim
What are you looking for?
Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.
Re: Flashers R Us
Actually, I am looking for a couple of Air Brake Reservoirs. He had one that was a nice epoxy casting.
-
- Posts: 1595
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Re: Flashers R Us
Yes, He made those.
Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.
Re: Flashers R Us
I may be stuck for just trying to turn one out of a wood dowel. It’s that “Football” shape that I’m looking for.
Re: Flashers R Us
https://www.shapeways.com/shops/k-kadwe ... +Parts&s=0
You can get them at Shapeways for $59
You can get them at Shapeways for $59
Re: Flashers R Us
AHH....very GOOD!!! Thanks for the Shapeways link!!
Re: Flashers R Us
Actually, I am looking for a couple of Air Brake Reservoirs. He had one that was a nice epoxy casting.
I am in direct contact with the person who makes these here in PA- how many do you need? I believe they are about $15 per. Send me a PM
Is there a market for these?
Pat
I am in direct contact with the person who makes these here in PA- how many do you need? I believe they are about $15 per. Send me a PM
Is there a market for these?
Pat
-
- Posts: 3
- Joined: Wed Feb 22, 2017 12:11 am
Re: Flashers R Us
The Brass headlight housings David used to sell, does anyone know where they - or something very similar can be purchased? I am in need of another one and truth be told, it does not need to be functional. Any help would be much appreciated. Thanks, Danny.