Nathan 1918A Injector pre-production sample

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: Harold_V, WJH, cbrew

Post Reply
AnthonyDuarte
Posts: 268
Joined: Tue Jan 19, 2010 10:46 am
Location: Mountain View, CA
Contact:

Nathan 1918A Injector pre-production sample

Post by AnthonyDuarte » Wed Oct 31, 2018 8:28 am

Hi everyone,

Just wanted to share a few pictures of the 1918A machined and assembled. There are some things still to work out with the castings before they go into production, but I wanted to have something more than a CAD model to show.

Enjoy,
Anthony
Eccentric Engineer

829C805B-B965-47FE-BD87-6592BFE5E75F.jpeg
1918A
16ECC260-B85D-46FB-B76F-D44A5A88BC5E.jpeg
1918A
FB61E37C-316B-4138-AA50-4270754C673A.jpeg
1918A with 1921 Starter Valve
414153AE-7DDE-4478-9C02-817186A36F5A.jpeg
1918A with 1921 starter valve

JKreider
Posts: 252
Joined: Fri Oct 07, 2005 8:38 pm
Location: Redlands, CA

Re: Nathan 1918A Injector pre-production sample

Post by JKreider » Wed Oct 31, 2018 8:42 am

WOW!!!

User avatar
JBodenmann
Posts: 2897
Joined: Sun Oct 26, 2003 1:37 pm
Location: Tehachapi, California

Re: Nathan 1918A Injector pre-production sample

Post by JBodenmann » Wed Oct 31, 2018 9:21 am

Hello My Friends
What Jim said and more!
Jack

User avatar
NP317
Posts: 1920
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon

Re: Nathan 1918A Injector pre-production sample

Post by NP317 » Wed Oct 31, 2018 10:20 am

OH MY!
~RN

User avatar
Short Line Tom
Posts: 44
Joined: Tue Jan 03, 2017 9:35 pm
Location: Römerberg/Germany

Re: Nathan 1918A Injector pre-production sample

Post by Short Line Tom » Wed Oct 31, 2018 12:42 pm

Mind-blowing!

Cheers!
Tom
Each new machine was made on a "used" one.

Asteamhead
Posts: 412
Joined: Tue Jul 31, 2012 1:59 pm
Location: Germany, Duesseldorf

Re: Nathan 1918A Injector pre-production sample

Post by Asteamhead » Wed Oct 31, 2018 3:59 pm

What a wounderful model, congratulations!
Eastimated this device will work as excellent as tne small EE injector already does, nothing else will be desirable any more!
Asteamhead

User avatar
Steamchris
Posts: 428
Joined: Fri Jan 27, 2012 3:48 pm
Location: Duisburg/Germany
Contact:

Re: Nathan 1918A Injector pre-production sample

Post by Steamchris » Wed Oct 31, 2018 4:03 pm

Thats absolutly outstanding!!!

Regards
Chris
The light at the end of the tunnel could be a train ;)

Health and Safety Notice

due to the current economic circumstances , the light at the end of the tunnel
has been switched off !

optigman
Posts: 99
Joined: Wed Jul 15, 2015 11:17 pm

Re: Nathan 1918A Injector pre-production sample

Post by optigman » Wed Oct 31, 2018 9:03 pm

You have done what others have only dreamed about. So much for doing things the old way when you get perfect results doing it the new way. Keep up the good work and high quality we have come to expect from your wonderful products. Richard

Post Reply