Search found 7 matches

by Lestat
Fri Apr 01, 2016 12:31 pm
Forum: Lathes
Topic: Following steady needed for Harrison M250
Replies: 2
Views: 1103

Re: Following steady needed for Harrison M250

RONALD wrote:If you are not already a member, join the Harrison Lathe Group at Yahoo, they are fairly active, and have a number of UK members.

http://groups.yahoo.com/group/harrisonlathe/
Thanks Ronald, just joined the group. Very good content, pity it's such a pain to browse through it.
by Lestat
Fri Apr 01, 2016 5:45 am
Forum: Lathes
Topic: Following steady needed for Harrison M250
Replies: 2
Views: 1103

Following steady needed for Harrison M250

I'm looking for a following steady for my Harrison M250. I am in the UK.
by Lestat
Fri Sep 14, 2012 2:51 pm
Forum: Lathes
Topic: Mini lathe upgrade: motor-to-spindle belt drive
Replies: 7
Views: 6053

Re: Mini lathe upgrade: motor-to-spindle belt drive

Lestat, This one is from the UK. http://www.rdgtools.co.uk/acatalog/MULTI-_VEE_PULLEYS.html Scroll Down, 3rd from the top. Ken. :) Thanks Ken, I checked those ones too but the small pulley is too big at 2''. It has to be around 1'' at the motor otherwise spindle pulley gets to be too big and won't ...
by Lestat
Thu Sep 13, 2012 6:43 pm
Forum: Lathes
Topic: Mini lathe upgrade: motor-to-spindle belt drive
Replies: 7
Views: 6053

Re: Mini lathe upgrade: motor-to-spindle belt drive

That's great Ken, thanks! I've sent them an email with requirements, will see what they say. Only snag is I'm on the other side of the pond :) Lestat, I almost forgot :oops: Welcome to The Home Machinist :) You might want to put your exact Worldly Location in your profile, so it will show under you...
by Lestat
Thu Sep 13, 2012 10:17 am
Forum: Lathes
Topic: Mini lathe upgrade: motor-to-spindle belt drive
Replies: 7
Views: 6053

Re: Mini lathe upgrade: motor-to-spindle belt drive

ken572 wrote:Hello, Lestat.

Here you go. :wink:

http://torquetrans.com/pulleys/multi-v- ... ulleys.htm

Ken. :)
That's great Ken, thanks!

I've sent them an email with requirements, will see what they say. Only snag is I'm on the other side of the pond :)
by Lestat
Thu Sep 13, 2012 9:02 am
Forum: Lathes
Topic: Mini lathe upgrade: motor-to-spindle belt drive
Replies: 7
Views: 6053

Mini lathe upgrade: motor-to-spindle belt drive

Hi chaps, I have a Arceurotrade C3 7x12 mini lathe and looking to upgrade the motor-to-spindle drive system. At the moment I'm running uprated steel gears on the original design, but there is way too much slack between the cogs. They simply made the cogs too small, probably to minimize losses due to...
by Lestat
Sun Apr 10, 2011 5:00 pm
Forum: Request For Services
Topic: Small(ish) lathe job
Replies: 0
Views: 5318

Small(ish) lathe job

Hi guys, can anybody help me with this piece? It's a bracket that will allow me to replace the rear tiny castors of a jack trolley with a bigger polyurethane wheel. I need 2 of them and material wise, I'm thinking stainless steel. I would even be happy to have the piece without the 3 holes at the ba...