Thanks Ronald, just joined the group. Very good content, pity it's such a pain to browse through it.RONALD wrote:If you are not already a member, join the Harrison Lathe Group at Yahoo, they are fairly active, and have a number of UK members.
http://groups.yahoo.com/group/harrisonlathe/
Search found 7 matches
- Fri Apr 01, 2016 12:31 pm
- Forum: Lathes
- Topic: Following steady needed for Harrison M250
- Replies: 2
- Views: 1853
Re: Following steady needed for Harrison M250
- Fri Apr 01, 2016 5:45 am
- Forum: Lathes
- Topic: Following steady needed for Harrison M250
- Replies: 2
- Views: 1853
Following steady needed for Harrison M250
I'm looking for a following steady for my Harrison M250. I am in the UK.
- Fri Sep 14, 2012 2:51 pm
- Forum: Lathes
- Topic: Mini lathe upgrade: motor-to-spindle belt drive
- Replies: 7
- Views: 8817
Re: Mini lathe upgrade: motor-to-spindle belt drive
Lestat, This one is from the UK. http://www.rdgtools.co.uk/acatalog/MULTI-_VEE_PULLEYS.html Scroll Down, 3rd from the top. Ken. :) Thanks Ken, I checked those ones too but the small pulley is too big at 2''. It has to be around 1'' at the motor otherwise spindle pulley gets to be too big and won't ...
- Thu Sep 13, 2012 6:43 pm
- Forum: Lathes
- Topic: Mini lathe upgrade: motor-to-spindle belt drive
- Replies: 7
- Views: 8817
Re: Mini lathe upgrade: motor-to-spindle belt drive
That's great Ken, thanks! I've sent them an email with requirements, will see what they say. Only snag is I'm on the other side of the pond :) Lestat, I almost forgot :oops: Welcome to The Home Machinist :) You might want to put your exact Worldly Location in your profile, so it will show under you...
- Thu Sep 13, 2012 10:17 am
- Forum: Lathes
- Topic: Mini lathe upgrade: motor-to-spindle belt drive
- Replies: 7
- Views: 8817
Re: Mini lathe upgrade: motor-to-spindle belt drive
That's great Ken, thanks!ken572 wrote:Hello, Lestat.
Here you go.
http://torquetrans.com/pulleys/multi-v- ... ulleys.htm
Ken.
I've sent them an email with requirements, will see what they say. Only snag is I'm on the other side of the pond
- Thu Sep 13, 2012 9:02 am
- Forum: Lathes
- Topic: Mini lathe upgrade: motor-to-spindle belt drive
- Replies: 7
- Views: 8817
Mini lathe upgrade: motor-to-spindle belt drive
Hi chaps, I have a Arceurotrade C3 7x12 mini lathe and looking to upgrade the motor-to-spindle drive system. At the moment I'm running uprated steel gears on the original design, but there is way too much slack between the cogs. They simply made the cogs too small, probably to minimize losses due to...
- Sun Apr 10, 2011 5:00 pm
- Forum: Request For Services
- Topic: Small(ish) lathe job
- Replies: 0
- Views: 6963
Small(ish) lathe job
Hi guys, can anybody help me with this piece? It's a bracket that will allow me to replace the rear tiny castors of a jack trolley with a bigger polyurethane wheel. I need 2 of them and material wise, I'm thinking stainless steel. I would even be happy to have the piece without the 3 holes at the ba...