Search found 7 matches
- Thu May 21, 2015 2:18 am
- Forum: Riding Scale Railroading
- Topic: building the galloping goose #2
- Replies: 19
- Views: 9543
Re: building the galloping goose #2
This is my version of Goose #2 that I built over the 2014/15 winter. This is my first biuld of any kind bigger than HO scale. I used (2) 500 watt electric scooter motors to a locomotive style rear truck that I made. I wanted to use this more like a locomotive so I did not build a seat or foot pegs o...
- Fri May 15, 2015 7:34 pm
- Forum: Riding Scale Railroading
- Topic: Plans for 1.6" wood reefer
- Replies: 12
- Views: 8349
Re: Plans for 1.6" wood reefer
Thank you all for your help it is greatly appreciated.
Ken - I will contact keith Jackman to find out more about his pfe plans, I was going to order his plans/drawings for the c-30 for my 2015/16 winter project.
-Noel
Ken - I will contact keith Jackman to find out more about his pfe plans, I was going to order his plans/drawings for the c-30 for my 2015/16 winter project.
-Noel
- Fri May 15, 2015 1:52 am
- Forum: Live Steam
- Topic: Dumb question - cleaning up castings
- Replies: 18
- Views: 5467
Re: Dumb question - cleaning up castings
Angle grinder with flap wheel followed by right angle die grinder with 3m scotch brite disc. the fine grit scotch brite can leave an almost mirror finish (they also have sanding disc for these) straight die grinder with barell sanding cylinders and cratex (rubberized sanding cylinders), and your bas...
- Fri May 15, 2015 1:14 am
- Forum: General Discussion
- Topic: Mitutoyo indicator rebuild
- Replies: 4
- Views: 2773
Re: Mitutoyo indicator rebuild
Look around localy and see if you have any pressision tool caliabation shops. They will be able fix it or tell you who can.. We have a mobile guy come in once a year and cailbrate eveything in the shop and he fix's some things and somethings dont justify the cost.
- Fri May 15, 2015 1:03 am
- Forum: Milling Machines
- Topic: Killing end mills left and right...
- Replies: 21
- Views: 5990
Re: Killing end mills left and right...
Feeds and speeds Surface feet x 3.82 / by dia of cutter = RPM RPM x chip load (per flute)x #of flutes = feed rate (inch per minute) compressed air works well as coolant and will eject your chips as well. Look up cool mist it is a good coolant for manual machines. Comes in 1 Gal bottle of concentrate...
- Fri May 15, 2015 12:26 am
- Forum: Riding Scale Railroading
- Topic: Plans for 1.6" wood reefer
- Replies: 12
- Views: 8349
Plans for 1.6" wood reefer
Hello all I have been wanting to build a few wood reefers in 1.5/1.6 7.5" gauge. Does anyone have plans or know were I can find some? Saw a real nice reefer for sale on Discover Live Steam a couple of weeks ago would like to find plans for one like it. I am not looking for free ones I am willin...
- Thu May 14, 2015 10:46 pm
- Forum: Riding Scale Railroading
- Topic: Plum Cove Boxcab Controller
- Replies: 25
- Views: 11112
Re: Plum Cove Boxcab Controller
Good luck tying to get any help from Plum cove unless he thinks you are going to spend 2K with him then he will answer you back in 10 min. Did someone say he was a pilot? It took me to months to get a responce and it came from his wife and stated he was real bussy "the head of the union trying ...