Search found 86 matches

by Don Bailey
Tue Feb 09, 2016 10:28 am
Forum: General Discussion
Topic: Intro to Jig Grinding by Don Bailey
Replies: 3
Views: 1014

Intro to Jig Grinding by Don Bailey

We are putting a Jig Grinder back in service after being idle for some time. Follow us through this challenging adventure as Glenn and I work this machine into service. This is the first of several video's that will virtually bring this machine to life before your very eyes. https://www.youtube.com/...
by Don Bailey
Tue Feb 02, 2016 8:54 am
Forum: General Discussion
Topic: OD Grinder tailstock Q and A
Replies: 0
Views: 655

OD Grinder tailstock Q and A

We took some time to answer some of the questions on the Tailstock rebuild series.

https://www.youtube.com/watch?v=gXQegVKHQZ8

by Don Bailey
Wed Jan 27, 2016 8:39 am
Forum: General Discussion
Topic: Rebuilding an OD Grinder Tailstock - Part 3 of 3
Replies: 0
Views: 717

Rebuilding an OD Grinder Tailstock - Part 3 of 3

Part 3 of this series shows how we bring the whole project together for final assembly of all the parts.
http://www.subtool.com
https://www.youtube.com/watch?v=3QNm4bCrUsg

by Don Bailey
Tue Jan 19, 2016 11:36 am
Forum: General Discussion
Topic: Rebuilding an OD Grinder Tailstock - Part 2 of 3
Replies: 2
Views: 898

Rebuilding an OD Grinder Tailstock - Part 2 of 3

Part 2 of this series shows how we make the shaft and hone the housing. Check it out and see how we did.Next week will bring the whole project together for final assembly of all the parts.
https://www.youtube.com/watch?v=qZo-Cg0V7CM

by Don Bailey
Wed Jan 13, 2016 2:00 pm
Forum: General Discussion
Topic: Rebuilding an OD Grinder Tailstock - Part 1 of 3
Replies: 0
Views: 666

Rebuilding an OD Grinder Tailstock - Part 1 of 3

Machine repair and maintenance is an important part of any machine shop. Take a look at how we rebuild the tailstock on one of our OD grinders.

https://www.youtube.com/watch?v=u1gZmPhJPTg

by Don Bailey
Tue Dec 08, 2015 10:41 am
Forum: General Discussion
Topic: Horizontal CNC Tombstones- what are the options?
Replies: 0
Views: 820

Horizontal CNC Tombstones- what are the options?

Watch Tim Allen as he takes you through our factory to show the wide variety of options for setting up your horizontal milling machines with Tombstone pallet fixtures.

https://www.youtube.com/watch?v=WJQkgh6M3Ec

by Don Bailey
Tue Dec 01, 2015 9:42 am
Forum: General Discussion
Topic: Investment casting process - field trip
Replies: 3
Views: 1040

Investment casting process - field trip

We take you through RLM Industries to show this outrageously complex process. Often times there are shapes that are impractical to machine economically and this is the only sensible option. Follow us as we show you why.

https://www.youtube.com/watch?v=M-hLMM4L_jo
by Don Bailey
Tue Nov 24, 2015 10:31 am
Forum: General Discussion
Topic: 60 degree or 90 degree V- block, which is better for determi
Replies: 2
Views: 1187

60 degree or 90 degree V- block, which is better for determi

Strong opinions that 60 degrees is better. We cannot find any scientific data to support this opinion. So, we go to the lab for a demonstration and show you the results. We purposely created an out of round condition on a roll from one of our Suburban Tool Sine Plates. We measured it first on one of...
by Don Bailey
Tue Nov 17, 2015 9:31 am
Forum: General Discussion
Topic: Out of round. Really? Show me.
Replies: 20
Views: 2684

Out of round. Really? Show me.

Knowing if your parts are round is sometimes extremely critical. If on two mating parts you feel a clunk when you rotate them, you know one thing for sure. Watch and see.

https://www.youtube.com/watch?v=tE6m1aBfN5A

by Don Bailey
Tue Nov 10, 2015 11:41 am
Forum: General Discussion
Topic: My Co2 laser needs a tuned up - now what?
Replies: 0
Views: 697

My Co2 laser needs a tuned up - now what?

Watch how Suburban Tool keeps their laser tuned up and maintained. So if you have a Co2 laser or are thinking of buying one, this is a must watched video.

https://www.youtube.com/watch?v=z01YbUQPdnk

by Don Bailey
Wed Nov 04, 2015 10:01 am
Forum: General Discussion
Topic: How to ID grind within .0002 made easy by Don Bailey
Replies: 1
Views: 820

How to ID grind within .0002 made easy by Don Bailey

Watch this step by step process to get an accurate part off the ID grinder the first time. We have included some great tips that will help you to be best in class. We hold these tolerances every day. So can you.
https://www.youtube.com/watch?v=BTnSOq2B6FI

by Don Bailey
Wed Oct 28, 2015 10:10 am
Forum: General Discussion
Topic: What it takes to remanufacture a spindle.
Replies: 0
Views: 754

What it takes to remanufacture a spindle.

Watch as we take a field trip to Precision Spindle Service Co. to see the complicated process of remanufacturing a spindle.
https://www.youtube.com/watch?v=Pmplff_f5pI