WOW ... Mauro put me onto Adrian's website ... lots and lot of plans for small diesel engines ... and a lot of technical info on building them.
Sill nothing on CO2 engines ....
Mike
Search found 4 matches
- Fri Oct 16, 2020 4:23 pm
- Forum: I.C. Engines
- Topic: Diesel and CO2 engine plans ?
- Replies: 2
- Views: 10598
- Fri Oct 16, 2020 3:12 pm
- Forum: I.C. Engines
- Topic: How to make very tight cylider / piston clearances ?
- Replies: 3
- Views: 10372
Re: How to make very tight cylider / piston clearances ?
Mauro ..... Awesome! Just checked out Adrian's site. Found an article by Ken Croft with exactly the information I was looking for. I had assumed the taper just because I had read Cox 049 glow engines had this taper. Thanks so much! Steve .... my dad always told me a man is limited by his pocket book...
- Thu Oct 15, 2020 10:42 pm
- Forum: I.C. Engines
- Topic: Diesel and CO2 engine plans ?
- Replies: 2
- Views: 10598
Diesel and CO2 engine plans ?
Post #2 ... I have been looking for plans for a small diesel engine ... say like a Mills .75 or 1.3 (and any copy of) piston ported engines (the Mills 2.4 was a rear rotary port). Does anyone know where I can find plans? Lots of partial ones out there and even how to articles but no complete set of ...
- Thu Oct 15, 2020 10:24 pm
- Forum: I.C. Engines
- Topic: How to make very tight cylider / piston clearances ?
- Replies: 3
- Views: 10372
How to make very tight cylider / piston clearances ?
OK ... I am a semi retired machinist (first post) In the "real world" almost everything I worked on was large ... sometimes very large. You could park 4 cars on the bed of the vertical lathe we had (this was at Westinghouse Generator and Turbine in Hamilton Ontario). When required to do ac...