Search found 4 matches

by Gene_Marino
Fri Feb 06, 2004 9:57 am
Forum: Sheet Metal Fabrication
Topic: Berkroy Circle Shear
Replies: 1
Views: 2937

Berkroy Circle Shear

I got a small Berkroy Circle Shear but have no manual. The blades are straight, not the angle type. Does anybody know how to determine the gap setting or spacing between the blades as they cut? If to close the waste will contort and bend, but it will cut good, if space is to great it will depress th...
by Gene_Marino
Fri Feb 06, 2004 8:03 am
Forum: General Discussion
Topic: Berkroy blade adjustment??
Replies: 2
Views: 587

Berkroy blade adjustment??

I got a small Berkroy Circle Shear but have no manual. The blades are straight, not the angle type. Does anybody know how to determine the gap setting or spacing between the blades as they cut? If to close the waste will contort and bend, but it will cut good, if space is to great it will depress th...
by Gene_Marino
Mon Nov 03, 2003 1:27 pm
Forum: General Discussion
Topic: Left hand or right hand thread?
Replies: 3
Views: 927

Left hand or right hand thread?

I am putting together a spindle for a metal spinning lathe I am making from scratch. The right end has a 1x8 thread and is fine. The left end of the spindle requires a nut to hold the whole thing tight. Will a 3/4X16 right hand thread losen or do I have to go to left hand thread. I bought a couple o...
by Gene_Marino
Thu Oct 02, 2003 9:03 am
Forum: General Discussion
Topic: Making internal MT2
Replies: 14
Views: 3169

Making internal MT2

I need to make a MT2 internal in a piece of 1 1/4 X 8 round . I have not made any MT before. It seams a tapered drill or end mill should be available to rought it out and then finish with a MT 2 tapered reamer. All I have found are roughing and finishing MT2 reamers. Anybody been here before with an...