Search found 4 matches
- Fri Feb 06, 2004 9:57 am
- Forum: Sheet Metal Fabrication
- Topic: Berkroy Circle Shear
- Replies: 1
- Views: 4534
Berkroy Circle Shear
I got a small Berkroy Circle Shear but have no manual. The blades are straight, not the angle type. Does anybody know how to determine the gap setting or spacing between the blades as they cut? If to close the waste will contort and bend, but it will cut good, if space is to great it will depress th...
- Fri Feb 06, 2004 8:03 am
- Forum: General Discussion
- Topic: Berkroy blade adjustment??
- Replies: 2
- Views: 1008
Berkroy blade adjustment??
I got a small Berkroy Circle Shear but have no manual. The blades are straight, not the angle type. Does anybody know how to determine the gap setting or spacing between the blades as they cut? If to close the waste will contort and bend, but it will cut good, if space is to great it will depress th...
- Mon Nov 03, 2003 1:27 pm
- Forum: General Discussion
- Topic: Left hand or right hand thread?
- Replies: 3
- Views: 1685
Left hand or right hand thread?
I am putting together a spindle for a metal spinning lathe I am making from scratch. The right end has a 1x8 thread and is fine. The left end of the spindle requires a nut to hold the whole thing tight. Will a 3/4X16 right hand thread losen or do I have to go to left hand thread. I bought a couple o...
- Thu Oct 02, 2003 9:03 am
- Forum: General Discussion
- Topic: Making internal MT2
- Replies: 14
- Views: 5571
Making internal MT2
I need to make a MT2 internal in a piece of 1 1/4 X 8 round . I have not made any MT before. It seams a tapered drill or end mill should be available to rought it out and then finish with a MT 2 tapered reamer. All I have found are roughing and finishing MT2 reamers. Anybody been here before with an...