Search found 208 matches

by doublereefed
Mon Jul 26, 2021 12:20 pm
Forum: Live Steam
Topic: Cylinder Covers for Allen Mogul
Replies: 15
Views: 854

Re: Cylinder Covers for Allen Mogul

Wow that looks good. OK, modifying my plan for .015 or .020. Much easier to turn down the insides of my existing covers. Thanks guys!
by doublereefed
Mon Jul 26, 2021 10:49 am
Forum: Live Steam
Topic: Cylinder Covers for Allen Mogul
Replies: 15
Views: 854

Re: Cylinder Covers for Allen Mogul

OK, so it sounds like I'm on the right path for the jacket, but need to use minimum 0.050 and modify the brass cylinder covers to suit that. Thanks for the advice.
by doublereefed
Sun Jul 25, 2021 10:42 pm
Forum: Live Steam
Topic: Cylinder Covers for Allen Mogul
Replies: 15
Views: 854

Cylinder Covers for Allen Mogul

I'm contemplating how to tackle cylinder covers for my Allen Mogul. .008 or .009 shim stock will fit under the brass covers seen in the photo. Create the shape, retain it with those covers, good to go. Or is .008 to thin? Even with half hard stock it's probably too thin? How do most Allen Mogul buil...
by doublereefed
Tue Jul 20, 2021 1:03 pm
Forum: Live Steam
Topic: Air over water boiler test?
Replies: 9
Views: 1291

Re: Air over water boiler test?

Gents, thank you for the responses and the details. OK, I'm convinced air over water is not a great way to go. I do have a tender pump Carl, I just rebuilt it. Great plan, why didn't I think of that? And to be clear this is a home test to see if there are any issues before I drive the 8-12 hours to ...
by doublereefed
Mon Jul 19, 2021 12:28 pm
Forum: Live Steam
Topic: Air over water boiler test?
Replies: 9
Views: 1291

Air over water boiler test?

I need to do a boiler test to check things before I travel. It's been a few years... thank you COVID. Anything wrong with an air pressure over water test? My plan is to fill the boiler completely full right up to the safeties, which are the highest point on the boiler. Cap one and put a pressure fit...
by doublereefed
Wed Mar 17, 2021 10:59 pm
Forum: Live Steam
Topic: Max point load on 2 x (6)(8)(10) Wood Beam
Replies: 25
Views: 9357

Re: Max point load on 2 x (6)(8)(10) Wood Beam

John, I'm going to go with double 2x10s! That square of the dimension thing I think, right?
by doublereefed
Wed Mar 17, 2021 9:39 pm
Forum: Live Steam
Topic: Max point load on 2 x (6)(8)(10) Wood Beam
Replies: 25
Views: 9357

Re: Max point load on 2 x (6)(8)(10) Wood Beam

Rudd, thanks for that. Imagine 1,500 lbs resting in the middle of a sawhorse. Thank you for interpreting the results for me. I'm going to go with triple 2x8s... and load it up slowly.
by doublereefed
Wed Mar 17, 2021 5:39 pm
Forum: Live Steam
Topic: Max point load on 2 x (6)(8)(10) Wood Beam
Replies: 25
Views: 9357

Re: Max point load on 2 x (6)(8)(10) Wood Beam

Thanks all! Yes, I need to clarify. This is for a static frame that would be required to pick up the end of the beam. It will not be in a trailer under dynamic loads or anything like that. My problems is... I had see the forestry forum calculator before, and even using their data (Doug Fir North for...
by doublereefed
Mon Mar 15, 2021 5:35 pm
Forum: Live Steam
Topic: Max point load on 2 x (6)(8)(10) Wood Beam
Replies: 25
Views: 9357

Max point load on 2 x (6)(8)(10) Wood Beam

I turn to you all here because there's so many smart people on this list. I can't find information that tells me the safe max point load for a 2x6, 2x8, etc. wood beam. The Google results are all about floor systems with distributed loads and a system of beams on center. I need to build a rack relat...
by doublereefed
Mon Apr 13, 2020 12:10 pm
Forum: Live Steam
Topic: Ash Pan Latch Ideas?
Replies: 14
Views: 7491

Re: Ash Pan Latch Ideas?

I get it now. Thanks for taking the time to post that Marty.
by doublereefed
Sun Apr 12, 2020 8:33 pm
Forum: Live Steam
Topic: Ash Pan Latch Ideas?
Replies: 14
Views: 7491

Re: Ash Pan Latch Ideas?

Love the idea of the remote release. However, MAGNETS. I'm on it Steve. Perfect solution. Thanks!
by doublereefed
Sun Apr 12, 2020 12:59 pm
Forum: Live Steam
Topic: Ash Pan Latch Ideas?
Replies: 14
Views: 7491

Re: Ash Pan Latch Ideas?

Bill, good point. I have a gap on the slides, we shall see.

Marty... I like the idea of using friction. I'm not quite following the geometry you describe. Could you provide some more insight?

Thanks!