Search found 543 matches

by Black_Moons
Fri Aug 07, 2009 8:11 pm
Forum: General Discussion
Topic: Goodbye.
Replies: 25
Views: 4471

frank: there was no bisbehavor. Infact I don't even consider what harold censored me for as 'swearing' as it was completely non offensive to anyone except apparently harold, who proceeded to threaten to ban me if I did'nt stop. as I don't feel like rewiring my brain for one little man, i'll just go ...
by Black_Moons
Fri Aug 07, 2009 12:44 pm
Forum: General Discussion
Topic: Goodbye.
Replies: 25
Views: 4471

Alas, I don't want to offend anyone, but personaly i feel highly offended when someone trys to takes away my right to say simple everyday phrases like 'cheap <insert 3 letter word here that nobody cares about>' Especialy when that person makes remarks about female dogs that I feel is 10x worse then ...
by Black_Moons
Fri Aug 07, 2009 4:12 am
Forum: General Discussion
Topic: Goodbye.
Replies: 25
Views: 4471

Harold, you don't police the forum, you provide the service of a script sware filter without the 100% effectiveness. Humans 'moderate' forums because they can tell the diffrence beween a term being used offensively, and a term being used.. in a thousand other non offensive ways. Id be all in favor o...
by Black_Moons
Fri Aug 07, 2009 2:58 am
Forum: General Discussion
Topic: Goodbye.
Replies: 25
Views: 4471

Goodbye.

well Id like to take this chance to say goodbye, since im sick of harold threatening to ban me for saying common everyday phrases that nobody actualy objects to, i'll just leave of my own accord. If anyone has any suggestions for other forums I could go to that allow the same level of mature adult t...
by Black_Moons
Thu Aug 06, 2009 10:25 pm
Forum: General Discussion
Topic: Intro test message
Replies: 20
Views: 5397

seal killer: Can I eat your chickens? :P
by Black_Moons
Thu Aug 06, 2009 6:37 pm
Forum: General Discussion
Topic: Ream and Drill Size
Replies: 22
Views: 8095

Knurling can help with press fits, and likey reduce the stress needed to make very small diamiter press fits without having to be super precise. Iv heard of people reaming out holes using soft metals like copper rods with abrasives that get embeded.. more of a honing I guess.. but likey to help you ...
by Black_Moons
Thu Aug 06, 2009 6:30 pm
Forum: Lathes
Topic: Choosing Lathe DRO Scales
Replies: 37
Views: 6510

Ahhh ok that makes sense
by Black_Moons
Thu Aug 06, 2009 6:28 pm
Forum: General Discussion
Topic: Denial
Replies: 27
Views: 4812

baddog: make a cool spring loaded waxstick feeder! :) steamin10: Its the stand with bason that makes the 'coolant' 7/12's worth more, Not the cheap * $20 submerseable pump or plumbing, ie: no mess :) Make yourself your own coolant bason :) If you want it to be professional, try sheet metal + welding...
by Black_Moons
Thu Aug 06, 2009 2:55 pm
Forum: General Discussion
Topic: Converting Baldor buffer to grinder - ideas?
Replies: 14
Views: 5633

Steve: So? If the weight is to much for just an extention shaft, buy 2 sets of bearings in blocks and make yourself a new shaft :) http://www.briery.com/vortex/engine_compartment/images/jack_shaft_modification/bearing_blocks.jpg something like those + a pully, motor, some lathe time to turn the shaf...
by Black_Moons
Thu Aug 06, 2009 2:42 pm
Forum: General Discussion
Topic: Rotary table preuse checklist
Replies: 9
Views: 1598

Iv heard the phaseII rotary tables only leak when horzontal, if vertical the oil more or less stays in place.
(I wonder if the Horzontal only tables leak all the time, or if its just because they made compermises for the vertical)
by Black_Moons
Thu Aug 06, 2009 2:40 pm
Forum: General Discussion
Topic: tumbler media question
Replies: 6
Views: 1380

I know the local hobby shop sells small 1lb~ or so bags of verious grits (I think from like 80 to 600) of... hmm, I forget what exactly.. rock polishing abrasive anyway.. I think it was aluminum oxide or something harder. Might be worth checking out since you can buy small indivual bags of whatever ...
by Black_Moons
Thu Aug 06, 2009 2:23 pm
Forum: General Discussion
Topic: Weight Difference Between Rotary Tables
Replies: 37
Views: 6344

Yea. last I tryed enco (que rant) the (#@% would'nt ship ANY rotary tables, not even the 4" rotary table by UPS even though it was well under UPS'es limit because they said 'due to high damage claims...' Aka, 'durrr we don't know how to package a rotary table without it being loose in the box and th...