Search found 688 matches
- Thu Apr 18, 2024 9:35 pm
- Forum: General Discussion
- Topic: Determining manual milling X axis feed ?
- Replies: 5
- Views: 33
Re: Determining manual milling X axis feed ?
DOC is not chip load...but your concept of inches per minute is correct. Ok ! So I'll have to fiddle with the speed dial on the X-axis with a stop watch to get the inch p/m. Chip load is how much thickness of material is removed by each insert as it rotates through, and up until you run out of hors...
- Thu Apr 18, 2024 8:36 pm
- Forum: General Discussion
- Topic: Determining manual milling X axis feed ?
- Replies: 5
- Views: 33
Re: Determining manual milling X axis feed ?
Feeds are a function of tooth load and therefore a function of spindle speed, and cutter material and stock material... And machine rigidity and number if teeth in the tool. Ok, I understand how all those parameters effect each other, I'm going to use this example from a current project I'm doing u...
- Thu Apr 18, 2024 6:21 pm
- Forum: General Discussion
- Topic: Determining manual milling X axis feed ?
- Replies: 5
- Views: 33
Determining manual milling X axis feed ?
There is plenty of info on the web regarding speeds and feeds for milling various metals, and I've been doing a deep dive in my down time to extend tool life and get better a better finish. The X-axis or feed info seems to be geared towards CNC where the sum of the formula for feeds, or X-axis movem...
- Mon Apr 08, 2024 8:17 pm
- Forum: Buy, Sell, Trade, Wanted, Free!
- Topic: FS - Lincoln Power MIG 210 MP Welder
- Replies: 1
- Views: 283
Re: FS - Lincoln Power MIG 210 MP Welder
More pictures -
- Mon Apr 08, 2024 8:14 pm
- Forum: Buy, Sell, Trade, Wanted, Free!
- Topic: FS - Lincoln Power MIG 210 MP Welder
- Replies: 1
- Views: 283
FS - Lincoln Power MIG 210 MP Welder
The Lincoln 210 MP has been sitting idle for close to 5 years and it needs a new home. It’s been used on one or two small projects, not including my practice welding, so it’s essentially like new. It was bought as the Aluminum One Pack special package deal from Lincoln Electric that included the Mag...
- Thu Apr 04, 2024 10:08 pm
- Forum: Buy, Sell, Trade, Wanted, Free!
- Topic: FS - 8 -1/2" dia. slotted faceplate
- Replies: 1
- Views: 805
FS - 8 -1/2" dia. slotted faceplate
I think it's a Atlas / Craftsman faceplate, in very good shape, bought to possibly use on my lathe but I decided that it's not going to work. There is a number cast into the plate 9-365, has a 1.5" - 8 spindle thread. Asking $45.00 plus shipping ( should fit in a medium flat rate box ) Paypal o...
- Sun Mar 31, 2024 6:10 pm
- Forum: General Discussion
- Topic: Aluminium U C Channel Unequal Sizes Available
- Replies: 6
- Views: 548
Re: Aluminium U C Channel Unequal Sizes Available
Don't think online metals ships to the UK, you might try Googling for - aluminum extrusion suppliers in the UK
to find something closer to you.
to find something closer to you.
- Wed Feb 28, 2024 6:55 pm
- Forum: Live Steam
- Topic: Pattern Making
- Replies: 9
- Views: 1448
Re: Pattern Making
Are you pouring the Freeman Fast Cast directly on a pattern in one shot to make a mold ? One thing you can do with the Freeman material to make a mold is brush the material on your pattern in layers rather than in a one shot pour, by brushing in layers you'll have less of a exotherm than one solid m...
- Sun Feb 25, 2024 7:57 pm
- Forum: Lathes
- Topic: New Knurling tool
- Replies: 17
- Views: 1731
Re: New Knurling tool
Do you have any idea how expensive brass is these days? Sheeesh! Actually I do! I ordered a piece of brass from MMC at 6" x 6" x 3/8"....they sent me 6" x 6' x 3/8" :| God thing I didn't have to pay for the extra :lol: Woah !! You ordered 6 in x 6 in x 3/8 in and they sent ...
- Fri Feb 16, 2024 8:04 pm
- Forum: Live Steam
- Topic: Paint prep
- Replies: 7
- Views: 864
Re: Paint prep
+ 1 with what Steamin suggests, I'll also add do a wipe with 99% isopropyl, you'd be surprised at how much is left over
that lacquer thinner and acetone didn't remove.
that lacquer thinner and acetone didn't remove.
- Mon Jan 29, 2024 1:18 pm
- Forum: General Discussion
- Topic: collets
- Replies: 10
- Views: 952
Re: collets
The elongated taper looks like TG style collets to me.
- Tue Jan 16, 2024 9:58 pm
- Forum: Lathes
- Topic: Maximat compact mq3100
- Replies: 9
- Views: 18823
Re: Maximat compact mq3100
You might want to join the EmcoV10Lathe Group there's a few guys there that have
this older Maximat lathe, and there is a repository of files there that may help.
https://groups.io/g/emcoV10lathe
this older Maximat lathe, and there is a repository of files there that may help.
https://groups.io/g/emcoV10lathe