Search found 396 matches

by Asteamhead
Wed Apr 17, 2019 6:08 am
Forum: Live Steam
Topic: Steam Turbine Question
Replies: 10
Views: 1734

Re: Steam Turbine Question

Hello Phil, RET, Just let me add some photos to show how a simple construction will do, too. Using a standard gear wheel (made of aluminium, if you can get) will work just fine :idea: . The steam is directed tangential along the wheel and is exausted after about 90°towards the generous exaust. Force...
by Asteamhead
Sun Apr 14, 2019 3:47 pm
Forum: Live Steam
Topic: Steam Turbine Question
Replies: 10
Views: 1734

Re: Steam Turbine Question

Hello Phil, Maybe the air inlet should be much smaller in diameter for using steam. A diameter of about 1 mm (1/32") should be fine! In addition the outlet might be enlarged to reduce back preasure. For use with steam the simple ball bearing to be seen won't work for a long time, anyway. Working ste...
by Asteamhead
Fri Mar 15, 2019 2:09 pm
Forum: Build Log
Topic: 3/4" Scale J1e
Replies: 112
Views: 17450

Re: 3/4" Scale J1e

Hello Jack,
Nice to see that (later on) hidden jewelry. Thanks for explaining the making!
Asteamhead
by Asteamhead
Wed Mar 06, 2019 6:03 am
Forum: Live Steam
Topic: Miniature millwork plus
Replies: 9
Views: 1750

Re: Miniature millwork plus

Greg,
very detailed miniature work, looks fine!
Asteamhead
by Asteamhead
Wed Feb 20, 2019 3:30 pm
Forum: Build Log
Topic: My N&W class A 1239 (gauge 5", 1 in 10 scale)
Replies: 169
Views: 56836

Re: My N&W class A 1239 (gauge 5", 1 in 10 scale)

Hello friends, We had a great weekend at Dresden :D . For the curves of the layout were a little tight for my A, I had it steaming on a roller board. Much better for the interested visitors to see her life directly in front of their eyes 8) instead down on the floor (so I think). We had her working ...
by Asteamhead
Mon Feb 11, 2019 4:38 pm
Forum: Live Steam
Topic: Power Reverser questions
Replies: 20
Views: 3445

Re: Power Reverser questions

Hello Moron, Thank you for your precise information! For power reversers were not common in Europe, any information would help for better understanding that system. I used Steam Cyclopedia as basis for my model construction. And yes, the precise, small and low loss valve is the heart of the reverser...
by Asteamhead
Sat Feb 09, 2019 9:13 am
Forum: Live Steam
Topic: Power Reverser questions
Replies: 20
Views: 3445

Re: Power Reverser questions

Hello Tim, In case your reverser will work on steam reliable (piston rings, stuffing box and reverse valve), this maybe o.k. Of course, speed is increased a great deal in regard to work on water! Maybe it's getting instable or creaping, cause there is almost no damping in this simple proportional st...
by Asteamhead
Wed Feb 06, 2019 6:59 pm
Forum: Build Log
Topic: 3/4" Scale J1e
Replies: 112
Views: 17450

Re: 3/4" Scale J1e

Harold, We (hobby) modelers can hardly match with such precision industrial products made by very scilled mechanics! :oops: The way I found (and which I recommend to other modellers) was to make simple tools :idea: before starting production! Means a little patience ... And to use a turntable whenev...
by Asteamhead
Mon Feb 04, 2019 12:11 pm
Forum: Live Steam
Topic: Disney American
Replies: 422
Views: 85381

Re: Disney American

Hello Jack, Just had a closer look to your topic Disney American for the first time. I mostly prefer 'Big Engines' , soory :oops: ! But your work is Impressive as always! :!: Just wanted to note that the check valves you made were of the same construction as mine. They worked reliable for years with...
by Asteamhead
Mon Feb 04, 2019 11:48 am
Forum: Build Log
Topic: 3/4" Scale J1e
Replies: 112
Views: 17450

Re: 3/4" Scale J1e

Hello Jack,
Knowing so well making such sophisticated parts - by means of both patience and will! Nobody will see them again once they are mounted inside / under the locomotive. But you (and some modelers of course :) ) know - that's it, isn't it? 8)
Thank you for posting!
Asteamhead
by Asteamhead
Sun Feb 03, 2019 4:36 pm
Forum: Build Log
Topic: Project: N&W class J on 5"gauge
Replies: 141
Views: 55595

Re: Project: N&W class J on 5"gauge

Hello steamchris,
You and your father as team did a very fine job, indeed!
Just one look to that type of trailer, when it will be finished after some more work. We are happy, both classes A and J hadn't their trailers been equiped with a brake :lol:
Carry on!
Asteamhead
by Asteamhead
Wed Jan 30, 2019 11:19 am
Forum: Build Log
Topic: My N&W class A 1239 (gauge 5", 1 in 10 scale)
Replies: 169
Views: 56836

Re: My N&W class A 1239 (gauge 5", 1 in 10 scale)

Hello my friends, After some necessary shop work on my other locomotive DB class 44, there is time again to continue with the A. For we intend to run a famous extra long freight in may with a 44 doubleheader on the point 8) , the 44 had priority until the end of year 2018. She is on steam again :D !...